-
13th September 2012, 05:52 AM
#31
WHhy wouldnt it come with OEM remotes from new?
Is it "fitted for/ but not with" a wireless system?... or keyed central locking at least?
All research I did when trying to sort our car out....most people changed over to Aftermarket systems, because of the cost savings (compared to Mr Nissans extotionate pricing)
Dave
99 GU 2.8 TD
Brisvegas, QLD
-
-
13th September 2012 05:52 AM
# ADS
Circuit advertisement
-
13th September 2012, 10:00 PM
#32
Originally Posted by
pjhicks3
IT might be a little off the subject - I have a GU 2008 DX, which doesn't come with remotes from factory, but as I understand it I can just buy one, and program it in, is this correct?
I'd say you probably can't. Usually in the DX models there's just a switch in the drivers side door which activates the other doors actuators. So you need to add a kit with a controller, actuator for the drivers side door & remotes. There's a similar kit mentioned earlier in this thread.
Dave
-
-
28th December 2012, 08:11 PM
#33
Advanced
Massive thanks to davejones! You took all the work out of this job. Just installed a Warlock alarm from JB Hifi in about 30mins and it's working great.
-
-
30th December 2012, 12:22 AM
#34
G'day Shaun
No problem!
Dave
-
-
3rd June 2013, 10:55 PM
#35
Advanced
Hi Shaun when you installed the warlock kit was it a kg800 ?
I have tried wiring the unit up but does not appear to be activating the central locking what form did you wire for positive, negative or positive/negative. Thanks Rodney ImageUploadedByTapatalk1370262281.308761.jpgImageUploadedByTapatalk1370262303.806712.jpg
-
-
4th June 2013, 06:55 PM
#36
Advanced
Originally Posted by
rodneyb81
From memory I think it was the positive/negative trigger connected to pin 2 & 8 as shown in davejones' pic attached.
ImageUploadedByMotorculture1370334300.640019.jpg
-
-
1st July 2013, 06:33 PM
#37
Hi I am new to the forum and trying to install a keyless module to my 2004 Patrol. Besides the wires mention in the thread, there are 6 or 7 more wires. Does any one know what they are for?
-
-
24th February 2018, 10:41 AM
#38
Hi DaveJones.
Would you know if it is possible to reset the receiver and remove any previously coded FOBs?
I am only able to get one FOB to operate at a time. There should be 4 memory slots for 4 keys but when I code a new one in, it deletes the previous one.
Cheers!
-
-
24th February 2018, 05:06 PM
#39
Originally Posted by
neilo99
Hi DaveJones.
Would you know if it is possible to reset the receiver and remove any previously coded FOBs?
I am only able to get one FOB to operate at a time. There should be 4 memory slots for 4 keys but when I code a new one in, it deletes the previous one.
Cheers!
No idea sorry. Not sure I'd bother. The price of their remotes was why I went this way in the first place.
DJ
-