-
3rd April 2019, 07:20 AM
#211
Thankyou AB for all the hard work gone into this
-
-
3rd April 2019 07:20 AM
# ADS
Circuit advertisement
-
21st May 2019, 03:36 PM
#212
thanks for the manual
-
-
13th July 2019, 04:31 PM
#213
Hi all just. I’m wanting to rebuild a 99 gu 2.8 gearbox. It’s for my sons 18th and just want some advice as to rebuild kits, manuals. It’s my parents old car they are handing down to their grandson. It was stopped being driven last yr and we dropped the oil out of transmission and there was quite a bit of metal in there. It was hard to get into and out of 2 gear. I’m quite handy with rebuilding thing just want to know the right parts I might need and a manual to guide me through. I’m going to get the basic kit with bearings and seals then purchase parts that are damaged when I come a cross them. So any ideas for places for cheap gears sincros if I need them. Any help would be greatly appreciated
-
-
13th July 2019, 04:35 PM
#214
Also I have read the previous posts and I can’t believe the knowledge a lot of you have and that you are so generous to pass it on. Any info, videos or website that you have knowledge of that could assist would be fantastic. Thank you in advance
-
-
13th July 2019, 08:11 PM
#215
Daily Lurker
Originally Posted by
Rustyno1
Hi all just. I’m wanting to rebuild a 99 gu 2.8 gearbox. It’s for my sons 18th and just want some advice as to rebuild kits, manuals. It’s my parents old car they are handing down to their grandson. It was stopped being driven last yr and we dropped the oil out of transmission and there was quite a bit of metal in there. It was hard to get into and out of 2 gear. I’m quite handy with rebuilding thing just want to know the right parts I might need and a manual to guide me through. I’m going to get the basic kit with bearings and seals then purchase parts that are damaged when I come a cross them. So any ideas for places for cheap gears sincros if I need them. Any help would be greatly appreciated
Hi mate, just read your two posts, as you seem to have garnered, you will learn alot more from the members on here than the manuals. If you have a specific question (such as rebuild kitsch etc) I suggest starting a thread with your questions and intentions? Alot of the more knowledgeable members dont venture into this thread as most people that come here are one post wonders "thanks for the manual" never to be seen again.
Sent from my SM-G930F using Tapatalk
-
-
14th July 2019, 02:46 PM
#216
GU 1999 2.8l 5speed manual Gearbox rebuild help required
Thank you. I have posted a new thread:
GU 1999 2.8l 5speed manual Gearbox rebuild help required
Last edited by Rustyno1; 14th July 2019 at 02:48 PM.
Reason: Tread title
-
-
14th July 2019, 02:49 PM
#217
If you could send traffic to that tread I would appreciate it
-
-
7th August 2019, 10:25 PM
#218
thanks for the manual!
-
-
21st August 2019, 07:57 PM
#219
Thanks for putting up manual. Legend
-
-
22nd August 2019, 02:40 PM
#220
Originally Posted by
Rustyno1
Thanks for putting up manual. Legend
Yeah and the best bit is you dont have to make 25 posts on the forum to get it anymore....
-