-
12th September 2016, 02:30 PM
#6951
Originally Posted by
Kimbo63
Any photos by chance mark?
Thats one thing I forgot to do sorry. Pretty much on the underside of the flare( facing down) theres a large hole, I just used a hole saw, this exposes the bottom of the sill panel, then in the sill panel itself I drilled three smaller holes there for the crud to drain out. As there was a fair bit in there that has nowhere to go once its in there.
-
The Following User Says Thank You to mudski For This Useful Post:
Kimbo63 (12th September 2016)
-
12th September 2016 02:30 PM
# ADS
Circuit advertisement
-
12th September 2016, 02:32 PM
#6952
Patrol God
Finally finished fitting the Superior Coil Tower Brace (no body lift).
My advice is: not to follow my advice.
-
-
12th September 2016, 02:43 PM
#6953
Originally Posted by
mudnut
Finally finished fitting the Superior Coil Tower Brace (no body lift).
Sounds like you had fun with that!
-
-
12th September 2016, 03:11 PM
#6954
Patrol God
I have completed the feedback form on their website as I still have to buy some75mm bolts to fit in the adjustment on the front arms. I took my time as I have health problems. If i had the choice again I would pay someone to fit the braces.
My advice is: not to follow my advice.
-
The Following User Says Thank You to mudnut For This Useful Post:
threedogs (12th September 2016)
-
12th September 2016, 03:50 PM
#6955
Originally Posted by
mudnut
I have completed the feedback form on their website as I still have to buy some75mm bolts to fit in the adjustment on the front arms. I took my time as I have health problems. If i had the choice again I would pay someone to fit the braces.
Hope it nothing too serious mate....
-
The Following User Says Thank You to mudski For This Useful Post:
mudnut (12th September 2016)
-
12th September 2016, 05:13 PM
#6956
Patrol God
Originally Posted by
mudski
Thats one thing I forgot to do sorry. Pretty much on the underside of the flare( facing down) theres a large hole, I just used a hole saw, this exposes the bottom of the sill panel, then in the sill panel itself I drilled three smaller holes there for the crud to drain out. As there was a fair bit in there that has nowhere to go once its in there.
were you able to treat any unpainted surfaces or didnt bother about it?
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
12th September 2016, 05:14 PM
#6957
Patrol God
Originally Posted by
growler2058
Just a single din Fusion $160 from super crap auto
Doof doof doof doof doof doof doof you animal ohh yeah doof doof doof
A little bit more $$ and you couldve had an Andriod double din set up
for what reason I have no idea why
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
growler2058 (12th September 2016)
-
12th September 2016, 07:00 PM
#6958
Patrol God
Originally Posted by
Ben-e-boy
So what was the weights. What valving was installed ie. #35, #40 etc
1450 front and 1350 rear.
And no idea on shims / valves went in.
I can ask if your interested.
-
-
12th September 2016, 07:26 PM
#6959
Bitumen Burner
It's not what I did, but what my young bloke did. He's a qualified tradie and honoured his warranty work! lol
Everything in the pod now works. My DVD player works, the onboard shower works, the lights work.
Gunna do a 'dry run' this coming weekend.
The only thing is, I haven't got a shower tent. Oh well, enough said! PML
I'll send you some pics.
Rossco
Winner of 'Best 4 x 4 ' at the 2017 Albany Agricultural Society Inc - Town n Country Ute Muster.
Ex Telstra - 2005, 4.2 TDi ute -with pod and more fruit than a grocery shop.
-
The Following 2 Users Say Thank You to DX grunt For This Useful Post:
BigRAWesty (12th September 2016), Stropp (12th September 2016)
-
12th September 2016, 07:33 PM
#6960
The 747
Originally Posted by
DX grunt
The only thing is, I haven't got a shower tent. Oh well, enough said! PML
I'll send you some pics.
Rossco, please don't!
-
The Following 3 Users Say Thank You to Winnie For This Useful Post:
Plasnart (13th September 2016), Stropp (12th September 2016), Woof (12th September 2016)