-
21st July 2016, 05:51 PM
#6751
Patrol Guru
Originally Posted by
threedogs
Check the EGR pipe as well for splits, they squeal like a stuck pig
Unless already blocked
Yeah I've read that , it will be blocked at both ends by the time I'm finished so that'll eliminate that pipe out of the equation , it's already blocked at the valve end but the pipe WAS still under pressure but not anymore , I was just going to block the manifold end of the EGR pipe and put it back together but while I've got it disassembled this far I thought I might as well pull a manifold off and put new gaskets on it as well . Can't see any soot leaks around it but it wouldn't take much of a leak to make a noise .
-
-
21st July 2016 05:51 PM
# ADS
Circuit advertisement
-
22nd July 2016, 12:00 AM
#6752
Patrol Guru
BREAKTHROUGH !!!!! Leaking around the front of the manifold , what an absolute poofter of a job that was - getting the oil & coolant lines off the turbo - the bloke that designed all that obviously never had to work on it , then get the little front heat shield off & then I found the leak .
-
The Following User Says Thank You to Sprock For This Useful Post:
BigRAWesty (22nd July 2016)
-
22nd July 2016, 12:21 PM
#6753
-
-
22nd July 2016, 12:58 PM
#6754
Patrol Guru
Just heading in to get the manifold gasket now , I'll start on it this arvo & probably finish in the morning , feel free to pop around & offer technical advice mate . You could also WATCH me drink stubbies 😝 Drank 5 last night pulling the turbo & then the manifold off 😏
-
The Following User Says Thank You to Sprock For This Useful Post:
BigRAWesty (23rd July 2016)
-
22nd July 2016, 01:26 PM
#6755
Patrol God
Originally Posted by
Sprock
Just heading in to get the manifold gasket now , I'll start on it this arvo & probably finish in the morning , feel free to pop around & offer technical advice mate . You could also WATCH me drink stubbies 😝 Drank 5 last night pulling the turbo & then the manifold off 😏
I thought it was at least a 7 stubby job lol
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
BigRAWesty (23rd July 2016)
-
22nd July 2016, 03:27 PM
#6756
Patrol Guru
So you've worked on a zd30 before then ? 😝 I worked fast lastnight 👍🏼
-
-
22nd July 2016, 04:33 PM
#6757
Originally Posted by
Sprock
Just heading in to get the manifold gasket now , I'll start on it this arvo & probably finish in the morning , feel free to pop around & offer technical advice mate . You could also WATCH me drink stubbies 😝 Drank 5 last night pulling the turbo & then the manifold off 😏
Dunno whats worse.
-
-
22nd July 2016, 05:09 PM
#6758
Patrol Guru
-
-
22nd July 2016, 06:55 PM
#6759
Patrol Guru
So Mudski it turns out that NOBODY in the Latrobe Valley stocks a manifold gasket for a ZD30- NOBODY . 😤 So I Ordered it in for the morning ......... So I guess I'll just sit here & drink inside 👍🏼
-
The Following User Says Thank You to Sprock For This Useful Post:
BigRAWesty (23rd July 2016)
-
23rd July 2016, 08:54 AM
#6760
Expert
Caster correction and spacers to push the diff forward.
I can now have mud flaps with the 33s
Drives a treat too.....
-
The Following User Says Thank You to rusty00 For This Useful Post:
BigRAWesty (23rd July 2016)