What did you do to your Patrol today!

[pickers]

image.jpgimage.jpg
Added some LEDs to my rear door table

[Dave_GU_ACT]

How hard is it to convert tail lights to LEDs?

I got a loom from the rear of a falcon sedan and put led globes in them. Used a hole saw to make the hole then used a semi round file to just make it fit.. Was pretty easy then wired it in from the lights in the bar..

[Dave_GU_ACT]

68 led T20 will fit in the front parkers make for very bright DRL to.

Yep on order from brightlight auto. I only use them. Even though they are a little on the dear side, their lights are very good as the Chinese ones aren't very bright.. When it's dark I'll take a few snap shots.

[Patrol-Guy]

You can buy bayonet led bulbs that just fit in place of the standard ones

Thanks, is there a need for resistors?

[meh]

Hit limp mode for the first time ever! 19psi in third gear..

[chrisc2306]

Thanks, is there a need for resistors?

Nope no need for resistors just replace the standard ones with led style ones and away you go. This is the ones I got obviously they are 24v because I have a safari but you can get 12v ones too
http://www.ebay.com.au/itm/221423169...84.m1423.l2649

[FNQGU]

While I had the ceiling down I decided to relocate the Redarc BMS head unit to the overhead console. Routed the head unit cable up the B Pillar and across the roof.

[hillclimber]

Tracing the feared 24v to 12v converter wires! :O they are all cut....

[Headhoncho67]

Replaced the front 31-10.5x15 tyres

[BigRAWesty]

While I had the ceiling down I decided to relocate the Redarc BMS head unit to the overhead console. Routed the head unit cable up the B Pillar and across the roof.

How did you go removing the roof lining from the front window rubber??