-
5th April 2018, 10:39 AM
#8261
-
-
5th April 2018 10:39 AM
# ADS
Circuit advertisement
-
7th April 2018, 05:26 PM
#8262
Patrol Freak
engine oil and filters.
air filter
sway bar d bushes
inner axle seal
repack bearings
seal rear pinon
rotate tyres
front pads
if its worth doin its worth over doin
-
-
7th April 2018, 06:17 PM
#8263
Legendary
Worked out my trailer plug is playing up , blinkers are barely visible ,brakes are non existent but tail lights are good .
-
-
8th April 2018, 04:39 PM
#8264
Patrol Freak
Cleaned it out and gave it a quick wash
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
-
8th April 2018, 04:48 PM
#8265
Patrol Freak
Scratched the body work on a track that mustn't have been used in 5 years. It's at the point where polishing achieves very little.
As I lay there looking up, taking in the spectacular view that was the night sky and the multitude of stars I asked myself, where did my tent go?
-
-
8th April 2018, 05:03 PM
#8266
Patrol Freak
Originally Posted by
Mc4by
Scratched the body work on a track that mustn't have been used in 5 years. It's at the point where polishing achieves very little.
what is this polishing you speak of ?
if its worth doin its worth over doin
-
The Following 3 Users Say Thank You to garett For This Useful Post:
GQtdauto (8th April 2018), Mc4by (8th April 2018), Plasnart (8th April 2018)
-
8th April 2018, 05:06 PM
#8267
Patrol Freak
Originally Posted by
garett
what is this polishing you speak of ?
At least when people see me drive by, they know I use it for the purpose it was designed for.
As I lay there looking up, taking in the spectacular view that was the night sky and the multitude of stars I asked myself, where did my tent go?
-
The Following User Says Thank You to Mc4by For This Useful Post:
GQtdauto (8th April 2018)
-
8th April 2018, 05:42 PM
#8268
I am he, fear me
Originally Posted by
Mc4by
At least when people see me drive by, they know I use it for the purpose it was designed for.
What a coincidence... I think exactly the same thing every time I see a Prado on a Flatbed...
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
-
The Following User Says Thank You to the evil twin For This Useful Post:
GQtdauto (8th April 2018)
-
8th April 2018, 06:55 PM
#8269
Patrol Freak
Thought about it as I pondered over the wounds I encountered from putting the flanged inlet elbow back on the CRD turbo with alternator still in place-try it out!!!
Also installed second EGR plate (inlet manifold) both ends blocked now, and put all back together after discovering that my turbo comp wheel thrust bearing was shot. New turbo and 3"ducting on the mod list (what an excuse for an upgrade)...
2008 GU WAG ST Manual CRD - To do the job
-
The Following User Says Thank You to Bidja For This Useful Post:
-
8th April 2018, 07:57 PM
#8270
Patrol Freak
Originally Posted by
Mc4by
Scratched the body work on a track that mustn't have been used in 5 years. It's at the point where polishing achieves very little.
Had to reverse out one of these yrs back and we were able to pick the blackberries as went.
2008 GU WAG ST Manual CRD - To do the job
-