Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Removed the wiring loom from the ecu and engine and packed it up to send off. Also removed all wiring/ birds nest from the aux battery going into the cab. There was so many wires i couldnt remeber what these wires were for. Now im left with a gaping hole in the firewall loom boot.
Once the conversion is done, i will re wire the enitre aux side and what ever was attached there and put the aux back in.
Re mounted my ECU-talk and fabricated three brackets so the awning will sit level with the gutter.
going to re-think the gauge side of things, happy as with the awning set up.
No metal on metal contact anywhere.
my icv% is still reasonably high
Hard ware will be changed to allen round head stainless bolts nuts etc.
Last edited by threedogs; 1st July 2015 at 02:25 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
Just wondering what model Runva you are running, and has it done everything you have asked of it?
Runva 11xp. Everything and more. Been used underwater a few times, and like I said, water ingress was at a minimum (tiny bit of grease discoloration near the free spool lever).
They come with great warranties and well priced. 10/10 would buy a again!
Originally Posted by Covo71
Reply With Quote
