Noisy clutch pedal

[BigMav]

Well had a quick look this morning and that pin seems ok. I will have a bit more of a fiddle with it and maybe slap some grease on it or something. I can't be stuffed doing it right at this moment its been a long day. lol.

[BigMav]

Greased up that pin and it seems to have helped it a little bit but still clicking. I think I need to have a look at another GQ to compare pins. Maybe the clutch master cylinder is stuffed?

[mikewrigley]

My clutch feels like it's creaking so not similar, but thinking that might be the master cylinder? Not a lot of experience with clutches on cars (one of the parts where bikes are so much easier!!!).

[Hongie]

COuld be the clucth pedal spring... used to happen on commodore quite a bit... bit of Wurth HHS2000 squirted on it seemed to fix it

[mikewrigley]

COuld be the clucth pedal spring... used to happen on commodore quite a bit... bit of Wurth HHS2000 squirted on it seemed to fix it

Could well be, I'll give that a go and see how I get on. Thanks.

[rusty_nail]

growlers, I reckon that could be the thrust/throwout bearing slopping about on the shaft

x2, i had a similar problem thrust race bearing had done itself in

[notonyournelly]

Id only pay any attention to if it starts to squeal or whistle