OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: GQ gearbox leak from bellhousing

  1. #1
    Administrator AB's Avatar
    Join Date
    May 2010
    Location
    Christmas Hills - Yarra Glen - Victoria
    Posts
    28,086
    Thanks
    13,590
    Thanked 20,771 Times in 8,582 Posts
    Mentioned
    581 Post(s)
    Tagged
    1 Thread(s)

    Unhappy GQ gearbox leak from bellhousing

    After arriving home yesterday from the meet up I noticed oil leaking from the bellhousing as per photo below.

    100% confirmed It's gearbox oil so can only assume the seal has gone in the gearbox and leaked into the bell housing?

    Not sure why It's that dirty either as It's only 15k old but anyway.

    Took the breather off and blasted air through the line, noticed a small amount of dirt come out the end at the top which may have been the cause????

    Next step before dropping the box would be to clean it all up, change the oil and see what happens.

    Although the photo looks bad the oil level is still full so it hasn't leaked a great deal.

    My questions are...Is it possible after doing 5000 hard kilometres towing the camper caused it to heat up and????....Breather might of been blocked too so once cleaned out will this be fixed....Yep, trying for the easy options first....LMAO

    Any other things to do/check, etc or ideas are welcomed!!!

    Not looking forward to this one!!!!
    Attached Images Attached Images

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  3. #2
    Patrol God taslucas's Avatar
    Join Date
    Aug 2011
    Location
    North West Tas
    Posts
    10,804
    Thanks
    3,366
    Thanked 6,883 Times in 3,670 Posts
    Mentioned
    56 Post(s)
    Tagged
    1 Thread(s)
    Its not the rear main seal is it?

    Or front main seal of gearbox??
    Hello from Under Down Under!

  4. #3
    Administrator AB's Avatar
    Join Date
    May 2010
    Location
    Christmas Hills - Yarra Glen - Victoria
    Posts
    28,086
    Thanks
    13,590
    Thanked 20,771 Times in 8,582 Posts
    Mentioned
    581 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by taslucas View Post
    Its not the rear main seal is it?
    Not rear main seal....

  5. #4
    Patrol God taslucas's Avatar
    Join Date
    Aug 2011
    Location
    North West Tas
    Posts
    10,804
    Thanks
    3,366
    Thanked 6,883 Times in 3,670 Posts
    Mentioned
    56 Post(s)
    Tagged
    1 Thread(s)
    Well thats a good start
    Hello from Under Down Under!

  6. #5
    Smart like tractor Ben-e-boy's Avatar
    Join Date
    Dec 2010
    Posts
    4,440
    Thanks
    735
    Thanked 4,041 Times in 1,746 Posts
    Mentioned
    22 Post(s)
    Tagged
    0 Thread(s)
    are you able to drop that inspection plate at the bottom of the bell housing and have a look inside, you may need an inspection mirror to get a visual on you main shaft seal????



    if you lived in qld a fair few of us would be around to help sort it as that is what us qlders do lol
    96 GQ coil/Cab
    08 G6eT


  7. #6
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,636
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    Thats a big leak AB ,thats not seeping?
    When did you change clutch last?
    Last edited by threedogs; 13th October 2012 at 09:20 PM.
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  8. #7
    Administrator AB's Avatar
    Join Date
    May 2010
    Location
    Christmas Hills - Yarra Glen - Victoria
    Posts
    28,086
    Thanks
    13,590
    Thanked 20,771 Times in 8,582 Posts
    Mentioned
    581 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by Ben-e-boy View Post
    are you able to drop that inspection plate at the bottom of the bell housing and have a look inside, you may need an inspection mirror to get a visual on you main shaft seal????



    if you lived in qld a fair few of us would be around to help sort it as that is what us qlders do lol
    Thanks for rubbing it in mate...lol

    I'll suss that out tomorrow, cheers

  9. #8
    Administrator AB's Avatar
    Join Date
    May 2010
    Location
    Christmas Hills - Yarra Glen - Victoria
    Posts
    28,086
    Thanks
    13,590
    Thanked 20,771 Times in 8,582 Posts
    Mentioned
    581 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by threedogs View Post
    Thats a big leak AB ,thats not seeping?
    When did you change clutch last?
    Clutch was only done about 4 months ago mate.

  10. #9
    Patrol God nissannewby's Avatar
    Join Date
    Mar 2012
    Location
    North brissy
    Posts
    8,200
    Thanks
    1,513
    Thanked 5,663 Times in 3,158 Posts
    Mentioned
    110 Post(s)
    Tagged
    1 Thread(s)
    Looks like a rear main. What colour is the oil?

  11. #10
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,636
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    From what I read here every one says change rear main at the same time you change clutch, you done a boo boo??
    Also is your bellhousing tight, no shuddering on way home???
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •