QLD Members Working Bee - Expression of Interest

[Bigrig]

EDIT: Location, date and time all locked in as per below.

Torq4x4
Unit 3, 82 Johnson Road
Hillcrest

9:00am start (please try to be there earlier to organise cars and schedule).

Work gear please guys!! It is a licensed workshop, so sandshoes as a minimum if not working on the cars, and steel caps/appropriate gear if you are (especially for those intending to weld).

Bring all tools that you have for the job you wish to have done. Doesn't matter if you don't have everything as others are bringing theirs (we should have no lack of equipment), but still bring what you have.

Bring all oils, filters and fluids you require if you are wanting fluid replacement - engine, transmission, transfer, diffs, brakes, power steering, fuel.

Bring all parts you want swapped in/out unless you intend to buy them from Torq4x4 or SuperCheap or something when you arrive.

Example:

I am bringing full tool kit (suits just about every nut, bolt, circlip, etc for GQ/GU Patrol), arc welder (gloves, mask, sticks etc), tap and die set, electrical kit (connectors, fuses, wire, etc, etc), HTB grease, grease gun, and assorted other gear.

------------------------------------------------

Howdy

as per the other thread, looking to lock in a day and location for another day of fun in the sun and working on the rigs. Thinking Saturday 24th September or Saturday 8th October? Thoughts

If people who are interested could list down the top two things they want done, what I propose we do is work out who's coming, what talents we have amongst that group, and as a result, pick 3 rigs out of the list to have specific work done - would obviously still like everyone to show up even if your rig isn't picked as a show of support for the process (bit rude only shoing up to get your truck done and then doing the Harry Holt!).

Sooooo ... who's up for it??

POLL ABOVE - mulitple choice allowed so select both if you can come, and what you are good at!!!!

I'll start - I'm in, don't care where - want to do the rear seal on my transfer case (which I can do, but would like extra hands); and/or a dual 12 volt outlet in the very rear cabin.

[NissanGQ4.2]

I'm in second......... don't care where,

Gearbox rebuild

Might be a bit hard 2 get it out of the driveway without the gearbox in there, but if you guys are in I will find a way *L*

My talents are drinking bourbon, but I'm also pretty good at drinking Scotch....beer....and petrol

[Bigrig]

I'm in second......... don't care where,

Gearbox rebuild

Might be a bit hard 2 get it out of the driveway without the gearbox in there, but if you guys are in I will find a way *L*

My talents are drinking bourbon, but I'm also pretty good at drinking Scotch....beer....and petrol

Find a way!!! Do something like a Flintstones car - feet out the bottom going like the clappers!!!! lol

[NissanGQ4.2]

Might be Good With - Transmission/Transfer Case after this week *LMAO*

You left bourbon drinking off the poll, now how can i vote!!!!

[Bigrig]

Might be Good With - Transmission/Transfer Case after this week *LMAO*

You left bourbon drinking off the poll, now how can i vote!!!!

True on both counts mate!! lol

[Finly Owner]

As far as I know I can't make it. If I could, I'm good on spanners and don't mind getting dirty. (ihave engine and diff swaps to do yet).



Tim

[Bigrig]

As far as I know I can't make it. If I could, I'm good on spanners and don't mind getting dirty. (ihave engine and diff swaps to do yet).



Tim

Oh ... you already have!!!! lmao (reference to the other thread!!!)

[Finly Owner]

Oh ... you already have!!!! lmao (reference to the other thread!!!)

HUH?


Tim

[Yendor]

I'll come and give a hand.

The 8th would suit me better.

It's my old man's birthday on the 24th (might be able to do a half day)

[Bigrig]

I'll come and give a hand.

The 8th would suit me better.

It's my old man's birthday on the 24th (might be able to do a half day)

Well, looking like the 8th then as the three that can attend so far are all good for the 8th ... top stuff mate!