OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 10 of 10

Thread: Cross country top mount intercooler clean and flush

Threaded View

  1. #1
    Beginner
    Join Date
    Oct 2021
    Posts
    10
    Thanks
    0
    Thanked 9 Times in 5 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Cross country top mount intercooler clean and flush

    So today I decided to do a clean and flush of my ultimate cross country top mount intercooler that is on my factory td42t blacktop motor.
    intercooler has been on for 110000 klms
    on removal found very small amount of oil in inlet hose from turbo, so as I thought no blow by on engine which has 335000 klms on it.
    Filled intercooler with 4 litres of kerosene , let soak for half hour and agitated, drained fluid from cooler into large container and blue kero had a slight tinge of black to it. Perfect no blow by.
    Rinsed with four litres of methylated spirits and drained, perfectly clear.
    Let dry and hair dryer to ensure dryness.
    Installed back to vehicle and she seems to be running even better.
    This after my usual 5000klm oil , filters and fuel filter service.
    Seem to come on boost slightly quicker , tuned to 16 psi, and think egts come down slightly faster than before when you get off the throttle.

  2. The Following 5 Users Say Thank You to Patrolking For This Useful Post:

    GregRT (18th March 2024), MB (18th March 2024), MudRunnerTD (11th December 2023), mudski (11th December 2023), Touses (11th December 2023)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •