-
2nd October 2023, 10:20 AM
#1
Patrol God
Clearview Original towing mirror - replacing the convex mirror
Hello,
The GU had a broken mirror when I purchased it. It was an easy fix and I thought I'd share.
The mirrors fitted are the Clearview Original towing mirror. The lower section of the left side was broken (part name: Clearview Original left side Convex Mirror Kit).
The Clearview website has a full range of spare parts (and even a section for pre-owned items) and I picked up the kit for about $45 delivered to Tas.
https://www.clearviewaccessories.com...owing-mirrors/
Easy to use site with fast shipping. It did not come with instructions but is dead simple to do.
The kit:
DSC_5195.JPG
Flick out the middle section of mirror to reveal the screw and undo.
DSC_5194.JPG
A bit rusty and yuck in there. I hit it with some rust converter and lubed up the slides.
DSC_5196.JPG
A single screw to put the new parts back in. Adjust screw so that the baseplate can move but is not loose. (you can't adjust screw once the mirror
goes on)
DSC_5197.JPG
Peel the back off the double-sided tape and stick the new convex mirror in place. Just like new!
DSC_5200.JPG
Hello from Under Down Under!
-
The Following 6 Users Say Thank You to taslucas For This Useful Post:
BrazilianY60 (3rd October 2023), Cremulator (3rd October 2023), jack (2nd October 2023), jff45 (3rd October 2023), mudski (2nd October 2023), PeeBee (2nd October 2023)
-
2nd October 2023 10:20 AM
# ADS
Circuit advertisement
-
2nd October 2023, 01:06 PM
#2
Good to know, just fitted a set to the GQ and am sure to smash them first time I am out and about! They are pretty big units.
-
-
2nd October 2023, 01:21 PM
#3
Nice. I've been thinking about getting some of these mirrors. But as Phil said i reckon I might smash them off out in the bush. Auto fold in would be nice on these.
-
-
2nd October 2023, 02:28 PM
#4
Patrol God
Yeah they're way too big for me. Half the reason to fix them was so I can't remove and sell. I think I want to go for factory sized ti electric.
.......from under the great down under.
Hello from Under Down Under!
-
The Following User Says Thank You to taslucas For This Useful Post:
mudski (2nd October 2023)