-
2nd April 2023, 02:17 AM
#1
Is there anything else it could be or am I just best of putting Manuel locking hubs i
Hi guys just after a little help thought I blow a hub the other weekend was drive up hill and my right hand front kept letting go with a Bang and then re locking I changed it from auto lock to Manuel lock and it was alright for a few hours Then happens a handful more times I replace the hub and now at first drive it start in grind again but as soon as I slow to 10kph it grabs and locks back in.
Is there anything else it could be or am I just best of putting Manuel locking hubs in
Cheers
-
-
2nd April 2023 02:17 AM
# ADS
Circuit advertisement
-
2nd April 2023, 12:57 PM
#2
Patrol God
Is there too much grease in there. After learning from this forum and taking another vehicles auto hubs apart, I could see how the excess grease could cause the auto hub to engage.
My advice is: not to follow my advice.
-
The Following User Says Thank You to mudnut For This Useful Post:
-
2nd April 2023, 03:40 PM
#3
if the hub looks ok inside it when you take it off . it might be that you have broken a cv joint.
-
The Following User Says Thank You to nipagu7 For This Useful Post:
-
3rd April 2023, 01:23 PM
#4
I would say you are -always- better putting in manual hubs, or manualising the auto ones.
- 1990 LWB Safari flatdeck, TD42 -
- 1988 LWB 7-seat Safari, TD42 -
1989 LWB 5-Seat, TD42
-