OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 9 of 9

Thread: 2022 NEW GU 2" lift issues (PLEASE HELP)

  1. #1
    Beginner
    Join Date
    Feb 2023
    Posts
    11
    Thanks
    0
    Thanked 5 Times in 4 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    2022 NEW GU 2" lift issues (PLEASE HELP)

    I have lifted my new GU Y61 PATROL with a 2" IRONMAN LIFT. I have noticed 2 issues, and I want to have confirmation from experts if the following issues are ok or not?

    1- I hear sounds coming while driving after the lift especially at speed between 100 - 120 KPH.

    2- Front propeller shaft (transfer case side) has been spitting grease.

    Regarding issue #1 I have installed gearbox spacers (1 peice each side) hoping the sound will go or decrease but I did not notice a big difference.

    What do I need to do if the above issues is real problems.

    Vehicle only has 2500km's. Drive straight and firm with no issues. Cornering is good with no issues at all. Wheel alignment done.

    I am frustrated because my lift is only 2" lift!

    Thank you

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many

     

  3. #2
    Beginner
    Join Date
    Feb 2023
    Posts
    11
    Thanks
    0
    Thanked 5 Times in 4 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Issue #2 the front propeler shaft (grease spitting from the Slip Yolk)

    Note: Yesterday I did some articulation testing my suspenion lift. I was in 4wd low range.

  4. #3
    Patrol Guru BrazilianY60's Avatar
    Join Date
    Apr 2021
    Location
    Brazil
    Posts
    858
    Thanks
    1,181
    Thanked 1,285 Times in 492 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Hi Aziz.
    Regarding the propeller shaft spitting grease, the only thing that holds the grease from flying all over is the rubber boot on the splined part of the shaft. Everytime I grease mine, the excess is slinged all over at the first ride. But that is the excess only, there is still grease on the spline.

    I can't comment on the noise issue because I have never seen such gearbox spacers, not sure why they are for.

    BTW, is yours the white with silver roof or black with golden roof? I think both looks awesome.
    1997 Blue Nissan Patrol Y60 blacktop TD42 - Honey Badger (build thread)
    2006 White Nissan Patrol Y61 TB45 - G-Unicorn (build thread)
    1997 Red Suzuki Samurai Canvas Top SJ413 - Tatui
    2005 White Toyota Landcruiser FZJ105 - Stormtrooper

  5. #4
    Beginner
    Join Date
    Feb 2023
    Posts
    11
    Thanks
    0
    Thanked 5 Times in 4 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    20230215_170301.jpg

    This is my 2022 SAFARI 4.8

  6. #5
    Beginner
    Join Date
    Feb 2023
    Posts
    11
    Thanks
    0
    Thanked 5 Times in 4 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    20230216_164510.jpg

    This where the grease is spitting. The slip yolk. Is this OK or do I need a spacer from the front propeller shaft? Say...25mm? I don't if I do because some websites only for big lifts but in the part description it is mentioned for 2"+

  7. The Following User Says Thank You to AzizY61 For This Useful Post:

    MudRunnerTD (26th February 2023)

  8. #6
    Patrol Guru BrazilianY60's Avatar
    Join Date
    Apr 2021
    Location
    Brazil
    Posts
    858
    Thanks
    1,181
    Thanked 1,285 Times in 492 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    I wouldn't bother with a propeller shaft spacer.
    Beautiful Patrol you have there.
    1997 Blue Nissan Patrol Y60 blacktop TD42 - Honey Badger (build thread)
    2006 White Nissan Patrol Y61 TB45 - G-Unicorn (build thread)
    1997 Red Suzuki Samurai Canvas Top SJ413 - Tatui
    2005 White Toyota Landcruiser FZJ105 - Stormtrooper

  9. #7
    Beginner
    Join Date
    Feb 2023
    Posts
    11
    Thanks
    0
    Thanked 5 Times in 4 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by BrazilianY60 View Post
    I wouldn't bother with a propeller shaft spacer.
    Beautiful Patrol you have there.
    I see.. I hope I don't need it.

    Thank you!

  10. #8
    Beginner
    Join Date
    Apr 2015
    Location
    Bairnsdale Victoria
    Posts
    9
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hi Aziz, What sounds are you hearing at 100 - 120?
    As Brazilian Y60 mentioned, only excess grease mate spitting out..

  11. #9
    Moderator MudRunnerTD's Avatar
    Join Date
    Jun 2010
    Location
    Geelong
    Posts
    15,394
    Thanks
    12,188
    Thanked 13,507 Times in 6,602 Posts
    Mentioned
    330 Post(s)
    Tagged
    1 Thread(s)
    Yeah grease is fine and as mentioned it just chicking out thr excess.

    I'm surprised you have fitted gearbox spacers for a 2 in lift? Not sure why you have done this?

    Check the uni at both ends of your rear drive shaft are aligned in parallel, if they are out of alignment it will be horrible. An easy miss and an easy fix.

    Check your driveshaft angles. You want both ends to have matching angles, the spacers may be affecting this.

    Sorry have not read the rest of the thread.
    Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
    Check out my Toy --> MudRunnerTD's GQ From the Ground Up

    Quote Originally Posted by Rogue Dung Beetle View Post
    Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
    The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
    WARNING: Towballs used for recoveries can, and do kill people and damage property.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •