-
16th February 2011, 11:20 AM
#1
Advanced
gq pinion BRG
hi all, a need your help, doing the frunt pinion bearing on my GQ, pinion is sloppy so time for bearing to be replaced, what i need to know is there any prelods i need to know, and where i could by bearings from??
-
-
16th February 2011 11:20 AM
# ADS
Circuit advertisement
-
16th February 2011, 04:28 PM
#2
Banned
Originally Posted by
RED
hi all, a need your help, doing the frunt pinion bearing on my GQ, pinion is sloppy so time for bearing to be replaced, what i need to know is there any prelods i need to know, and where i could by bearings from??
Tony - all yours mate for both translation and response - don't know what prelods are?
-
-
16th February 2011, 06:58 PM
#3
Check "PD" section of the GQ service manual, it starts on page 606 for a full run down. All the preloads and torque settings are covered in that section.
Tony
-
-
16th February 2011, 07:38 PM
#4
Banned
Originally Posted by
YNOT
Check "PD" section of the GQ service manual, it starts on page 606 for a full run down. All the preloads and torque settings are covered in that section.
Tony
Preload - got it, sorry ... wasn't with it ...
-
-
17th February 2011, 07:56 AM
#5
Advanced
thanks tony got diff apart last night and outer brg seized
-