Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
I have installed the Ultraguage MX1.4 display gauge to primarily display and monitor transmission temperatures - particuarly when towing. I have tried putting in the mgauge code for the engine oil temperature and when this is activated it locks the screen and causes it to blink on/off. The temeprature it seems to read looks about right but there is just teh problem of the screen lock/blinking. To stop it doing this and allow the other guages to then display/scroll, I have to remove these activation for the display of the engine oil temp.
Has anyone else with this gauge had teh same issue or managed to get the engine oil temperature displayed on this gauge without display/scroll issues?
If so can you please share the mgauge code used to make it work