Hey everyone, i have a Maverick TB42 SWB Carb model. I have purchased the pertronix module to convert from points. The hall effect type with the magnet. Just in regard to the wiring up side of things, i believe i need to go negative from the pertronix to neg on my coil, and positive from the pertronix to the white wire on my ballast resistor- however, on my vehicle there is only 2 bridged red wires on one side of the ballast, and nothing on the other side. There is a white/black stripe wire coming from somewhere (haven't traced back yet) that goes onto the positive of my coil. Wondering where i should put the positive lead from the pertronix to? The coil is a GT40 equivalent