-
27th December 2011, 11:46 PM
#11
Gday, the copper washers on the supply line leak after a while as they lose there crush that may be the leak at the top .
My fuel pump today stopped delivering high pressure fuel, I suspect the fuel soleniod has failed . I have to remove the top of the fuel pump to replace it .I will speak to Fremantle fuel injection tomorrow and ask about your problems and see if i can help. This is the first problem with anything with my fuel system for 120 000 ks touch wood. God love it.
-
The Following 2 Users Say Thank You to Jason Kozak For This Useful Post:
bobby-didge (22nd February 2012), mikewrigley (16th January 2012)
-
27th December 2011 11:46 PM
# ADS
Circuit advertisement
-
16th January 2012, 06:53 PM
#12
I have similar issue with my 2.8 but yet to determine where the leak is coming from. At the mo not a big drama though as not exactly pouring out and (as far as I can tell) it's not majorly affecting performance (yet-road driving only!). Degreasing this weekend so hopefully will be back on this thread with good news!!!! Thanks for the advice though.
-
-
16th January 2012, 06:54 PM
#13
Administrator
Originally Posted by
mikewrigley
I have similar issue with my 2.8 but yet to determine where the leak is coming from. At the mo not a big drama though as not exactly pouring out and (as far as I can tell) it's not majorly affecting performance (yet-road driving only!). Degreasing this weekend so hopefully will be back on this thread with good news!!!! Thanks for the advice though.
Pray for the top seal mate!
-
-
16th January 2012, 06:59 PM
#14
My thoughts exactly!!!! Got quoted $900 for the overhaul otherwise (though I am tempted to give it a whirl myself if it is worse-case scenario!). Have plenty of other things to sort out on my new purchase!
-
-
16th April 2012, 11:54 PM
#15
Beginner
Just done my pump
& injectors..exchange $2,500.. Did i get ripped?
-
-
19th April 2012, 05:59 AM
#16
Advanced
Originally Posted by
Dave.79
Just done my pump
& injectors..exchange $2,500.. Did i get ripped?
Nope they are dear to get done in shop. Paid 1900 for pump however I see a cheaper pump on ebay 600 and would be interested if anyones tried them.
-
-
19th April 2012, 09:42 PM
#17
Beginner
Do you know what brand mate?
-