-
6th August 2021, 01:06 PM
#1
GQ TB4.2E speedo not working
Hi guys,
I bought my first Patrol 2 weeks ago..so still learning alot!
The speedo on the dash does not work/move. Any ideas where I could start to figure out the problem?
-
-
6th August 2021 01:06 PM
# ADS
Circuit advertisement
-
6th August 2021, 07:21 PM
#2
Patrol God
The sender is on the upper drivers side of the Transfer Case. I use a battery drill with a square drive bit to run the sender. With a multi meter set to AC volts connected to the output wires you should see the voltage rise as the speed increases.
-
-
6th August 2021, 08:53 PM
#3
Thank you, I'll give that a try. I'll let you know how it goes 😀
-