OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 48

Thread: TB48 Brake Booster Upgrade to GQ 2.8TD

  1. #11
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,709
    Thanks
    4,587
    Thanked 4,674 Times in 2,651 Posts
    Mentioned
    190 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by nissannewby View Post
    Maybe it hasn't been bled properly? Easy to check if the vac is working. Take to vacuum line off and test. Will know pretty quick if there is a change.

    A larger master cylinder will allow more line pressure for less effort and the larger booster assists with the increase master volume. It's pretty easy to test brake pressure to see if your at the limits of the gq master. There are also various size masters in the GQ.

    GQ brakes are shit when they are at factory tare let alone grossly overweight.
    Thanks Matt, I have a gauge on the vac reservoir, and its pulling down hard. I have not driven it myself, however the mechanic I use and trust is not that happy either. I will make some enquiries with 'The rod shop' in the morning and see what they can offer. their initial thoughts were towards the 4.8 Booster and master cylinder. my issue is the booster is not serviceable as such, and only avail s/h unless I shell out another grand for a new one , which i will do if certain it will deliver the goods. the master cylinder is a slightly larger bore on the 4.8 also. the master cylinder is a brand new factory new unit but for the 2.8 TD engine.

    Appreciate the help Matt. this is the final piece of the puzzle on the build so want to do it correctly.
    Last edited by PeeBee; 24th May 2021 at 06:32 PM.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  3. #12
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,709
    Thanks
    4,587
    Thanked 4,674 Times in 2,651 Posts
    Mentioned
    190 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Hodge View Post
    PeeBee. 4.8 Brake stuff is treated like gold ingots at Patrolapart. You'll be paying through your nose for it. It's very sought after gear. I believe they only have refurbished units ...

    Sent from my Pixel 3a XL using Tapatalk
    Hodgey, they only sell new master cylinders and s/h booster units, the new ones are pretty dear, but if its what is needed to complete the picture I will buy. What i don't want is to find its not going to deliver. I have gone from 6 pistons to 20 so expect there to be a net increase in clamping force. I am wondering if the new piston seals aare still tight or unlubricated? Clutching at straws, will see what tomorrow brings. thanks for the post.

  4. #13
    Patrol God nissannewby's Avatar
    Join Date
    Mar 2012
    Location
    North brissy
    Posts
    8,200
    Thanks
    1,512
    Thanked 5,663 Times in 3,158 Posts
    Mentioned
    110 Post(s)
    Tagged
    1 Thread(s)
    Plenty of new ones available ex Dubai. But still expensive over there at $965 aud plus freight.

    46 Brake Boosters in stock to suit the 4.8.

  5. #14
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,709
    Thanks
    4,587
    Thanked 4,674 Times in 2,651 Posts
    Mentioned
    190 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by nissannewby View Post
    Plenty of new ones available ex Dubai. But still expensive over there at $965 aud plus freight.

    46 Brake Boosters in stock to suit the 4.8.
    Thanks Matt, I will see what tomorrow brings. I might take it to a brake specialist at last resort to check the actual pressure. Purchasing new isn't a problem as long as it is the correct diagnosis.

  6. #15
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,709
    Thanks
    4,587
    Thanked 4,674 Times in 2,651 Posts
    Mentioned
    190 Post(s)
    Tagged
    0 Thread(s)
    Righto, picked the vehicle up after the pads were removed this morning and de-glazed. The bedding in process for the pads is quite brutal in some regards and I took the vehicle out, following the Willwood Brake bed in procedure where possible. the brakes certainly improved, not quite at 'thru the windscreen' stuff yet, but I ran out of time, so will give them a pounding when I return after next roster. As they are now, they would pull up at 60kmhr in half the distance on patchy dry/wet road - bit hard to lean hard into them as the mud pattern simply locks up. The balance from front to back feels good also. I will see how this progresses, and if required move to the TB48 set-up. Pedal is firm and good feel also.
    Only moan is the pads are misaligned by about 2mm on the outer circumference, and after a 30klm trip there was a 0.25-0.5mm brake pad lip. Waiting for a comment from The Rod Shop now.

    Rod Shop say the offset is normal for the rears, but not the fronts, so something else to look at. They don't see it as a major, but does not make sense to have a portion of the pad not doing anything. They are recommending the 4.8TB master and booster so will see how I travel with the next roster break, but could be on the cards.
    Last edited by PeeBee; 26th May 2021 at 02:39 PM.

  7. The Following 2 Users Say Thank You to PeeBee For This Useful Post:

    Cremulator (26th May 2021), MB (27th May 2021)

  8. #16
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,709
    Thanks
    4,587
    Thanked 4,674 Times in 2,651 Posts
    Mentioned
    190 Post(s)
    Tagged
    0 Thread(s)

  9. The Following 2 Users Say Thank You to PeeBee For This Useful Post:

    Cremulator (26th May 2021), MB (27th May 2021)

  10. #17
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,709
    Thanks
    4,587
    Thanked 4,674 Times in 2,651 Posts
    Mentioned
    190 Post(s)
    Tagged
    0 Thread(s)
    OK, ordered the s/h TB48 booster and new TB48 master cylinder from PAP this morning. Spoke with 'Shorty', very helpful. They are sending it by courier to get around the 5klm rule. Next job is to find the master cylinder and booster as its covered in the usual PeeBee rats-nest of cables.

  11. The Following 2 Users Say Thank You to PeeBee For This Useful Post:

    Cremulator (31st May 2021), mudski (9th June 2021)

  12. #18
    Patrol Guru BrazilianY60's Avatar
    Join Date
    Apr 2021
    Location
    Brazil
    Posts
    834
    Thanks
    1,124
    Thanked 1,235 Times in 473 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by PeeBee View Post
    Thanks Matt, I have a gauge on the vac reservoir, and its pulling down hard.
    Hi PeeBee.
    Any chance you can post a picture of this vac gauge? Is it under the bonnet or in-cab?
    1997 Blue Nissan Patrol Y60 blacktop TD42 - Honey Badger (build thread)
    2006 White Nissan Patrol Y61 TB45 - G-Unicorn (build thread)
    1997 Red Suzuki Samurai Canvas Top SJ413 - Tatui
    2005 White Toyota Landcruiser FZJ105 - Stormtrooper

  13. #19
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    4,709
    Thanks
    4,587
    Thanked 4,674 Times in 2,651 Posts
    Mentioned
    190 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by BrazilianY60 View Post
    Hi PeeBee.
    Any chance you can post a picture of this vac gauge? Is it under the bonnet or in-cab?
    vac gauge.JPG

    Here you go. It came integral with the larger reservoir. Sits around -23-24 from memory

  14. The Following User Says Thank You to PeeBee For This Useful Post:

    BrazilianY60 (9th June 2021)

  15. #20
    Patrol Guru BrazilianY60's Avatar
    Join Date
    Apr 2021
    Location
    Brazil
    Posts
    834
    Thanks
    1,124
    Thanked 1,235 Times in 473 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Not even close to what I was imagining, just for that supercharger nose cone there, LOL. I thought you were talking about that small OEM reservoir.
    1997 Blue Nissan Patrol Y60 blacktop TD42 - Honey Badger (build thread)
    2006 White Nissan Patrol Y61 TB45 - G-Unicorn (build thread)
    1997 Red Suzuki Samurai Canvas Top SJ413 - Tatui
    2005 White Toyota Landcruiser FZJ105 - Stormtrooper

Page 2 of 5 FirstFirst 1234 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •