-
9th March 2021, 06:46 PM
#1
Patrol Guru
4.8 oil pressure sensor thread
HI, I am going to fit my Redarc oil pressure gauge on the weekend, the sender for the gauge has a 1/8 npt thread, is that the same as the sender in the 4.8?
2010 TB4.8, 5 speed auto TI Wagon, Beaudesert ceramic coated Extractors and 2 1/2 inch exhaust, 3inch lift, BP-51 shocks, Black hawk radius arms and drop boxes, Road Runner Offroad billet alloy draglink, Boss air bags, 295/70/17 KM3s, Redarc Gauges, GME XRS UHF, Autometre fuel gauge, Alpine head unit with offroad maps, Carbon winch, Opposite lock bull bar, Light Force Strikers, Safari Snorkel, Duel long range tanks, work in progress.
-
The Following User Says Thank You to paulyg For This Useful Post:
-
9th March 2021 06:46 PM
# ADS
Circuit advertisement
-
9th March 2021, 10:20 PM
#2
.........
-
-
10th March 2021, 10:44 AM
#3
Patrol Guru
It seems a lot of vehicle sensors use a 1/8 npt thread.
I am just trying to confirm if the Patrol 4.8 sensor is a 1/8 npt, before I get a T piece adapter, for the sensors
-
-
12th March 2021, 05:18 PM
#4
Patrol Guru
Went to Enzed, they found me a T piece for the sensors, the OEM thread is 1/8 bsp
2010 TB4.8, 5 speed auto TI Wagon, Beaudesert ceramic coated Extractors and 2 1/2 inch exhaust, 3inch lift, BP-51 shocks, Black hawk radius arms and drop boxes, Road Runner Offroad billet alloy draglink, Boss air bags, 295/70/17 KM3s, Redarc Gauges, GME XRS UHF, Autometre fuel gauge, Alpine head unit with offroad maps, Carbon winch, Opposite lock bull bar, Light Force Strikers, Safari Snorkel, Duel long range tanks, work in progress.
-