-
23rd February 2021, 09:54 AM
#1
Thermocouple fitting to Exhaust
Hi all still putting the mighty GU back together !!! I am going to install a exhaust temp gauge But … I am having trouble working out where to run the wires to the dash area .
what a bugger of a job . I have to remove the dash to replace the instrument Cluster and look at the radio connections fit the reverse camera .Another crap job . I have the thermocouple bung in the dump pipe so where to next. thanks to all trying to get ready to go away may June …
Last edited by MudRunnerTD; 23rd February 2021 at 05:55 PM.
-
-
23rd February 2021 09:54 AM
# ADS
Circuit advertisement
-
23rd February 2021, 05:54 PM
#2
Moderator
Originally Posted by
Tip12345
Hi all still putting the mighty GU back together !!! I am going to install a exhaust temp gauge But … I am having trouble working out where to run the wires to the dash area .
what a bugger of a job . I have to remove the dash to replace the instrument Cluster and look at the radio connections fit the reverse camera .Another crap job . I have the thermocouple bung in the dump pipe so where to next. thanks to all trying to get ready to go away may June …
There is a very handy bung in the fire wall where the Left Hand Drive model steering column would be. Its Big and will take a heap of wires if you want to.
The Trigger for the camera at the back can be taken from the reverse light mate at the back.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following 2 Users Say Thank You to MudRunnerTD For This Useful Post:
MB (23rd February 2021), Tip12345 (24th February 2021)
-
24th February 2021, 10:38 AM
#3
thanks that looks like a good place and keeps it out of the engine Bay .
-
-
27th February 2021, 10:18 AM
#4
Patrol God
I used like most here fitted a dual gauge pillar pod for Boost and EGT gauges.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-