Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
just chasing my tail over this grease dribble i’ve got on the driver side coming from between the stub axle and dust cover. i have replaced the seal twice and both times it has been dry for a day or two and then goes back to what’s pictured here. it’s got me stuffed, i did the entire front end about 20k ago, the leak doesn’t smell/feel at all like diff oil & is very sticky like grease once cooled off. i’ve had 0 issues with the passenger side since i did the front end rebuild and i did it exactly the same as drivers.
the seal is seated all the way in the rotor and facing the correct direction, i think there’s a chance i’ve put too much grease in the bearing assembly but other than that i have no idea.
i also believe it looks runny from sitting on the highway at 100km/h + today for around an hour. any know-how or advice would be greatly appreciated! cheers ��
Last edited by sussgq; 31st December 2020 at 09:01 PM.