Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
adding just for a try ! still thinking about cooling … gggg
trying to do one thing at a time . after that water pump . awaiting to get the dash looked at . I think I might buy a 2nd hand dash so I can stay on the road.
I am not enjoying the process at all !!
Righto. Pretty simple. Remove the hub > Undo the four bolts holding the two halves together > Lay the hub flat, mountnig flange up and let it sit for a while to let the oil move to the lower half of the hub > carefully pry open the hub, there is a really thin oring that surrounds the hub, this usually breaks so when installing, so a little bit of silicone will be needed.
I think from memory, 1 1/2 bottles was the sweet spot on top of whats in there. Start with one though.
Have fun.
Best get yourself a spare set of studs and nuts too before you start. The studs can strip when you take the nuts off... Part number for the studs is 08226-61410.
Last edited by mudski; 14th October 2020 at 10:48 AM.