Hi all.
Bought new drivers door striker as my rubber covering was worn. Cannot get the bolts out. Have soaked them in Rostoff and used impact driver. No luck.
Any ideas? Top bolt has some yellow paint mark on it. Unsure what that is for.
Cheers
Hi all.
Bought new drivers door striker as my rubber covering was worn. Cannot get the bolts out. Have soaked them in Rostoff and used impact driver. No luck.
Any ideas? Top bolt has some yellow paint mark on it. Unsure what that is for.
Cheers
i used a screw driver from 4wd super center like the one bellow
i pushed in so the tool wouldn't slip while also using a spanner on the end to get alot more force to turn it.
this method has served me well for many cars not just patrols
Capture.JPG
Older screwdrivers accept a ring spanner alsoIMG-20200610-WA0000.jpg
Sent from my SM-G965F using Tapatalk
I got red dust in my veins.
Check out My Rig here: Broken
Pics of Forum trips I've Been on:
Pizza at AB's - 2012 Knockwood - 2013 Krissos Place Australia Day - 2015 Pizza at AB's - March 2015 Pizza at AB's - May 2015 Dargo - 2015 Newnes - 2016
WARNING: Towballs used for recoveries can, and do kill people and damage property.
Cremulator (26th July 2020), PeeBee (25th July 2020), Rossco (24th July 2020), threedogs (1st September 2020)
Try giving the screwdriver a good wack first quite often does the trick. . They can be a bugger those stricker plate ones. .
Sent from my SM-G930F using Tapatalk
Use an impact screwdriver, the one with the hardened bits and you strike with a hammer - works very reliably
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy --> MudRunnerTD's GQ From the Ground Up
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
OK, missed that. Think your approach is right since the impact unit didn't work
I'd try welding a nut on if nothing else works, never had much luck with easy outs on things that are stuck firm. . Most wrongly named product ever lol
Sent from my SM-G930F using Tapatalk
MudRunnerTD (25th July 2020), PeeBee (25th July 2020)