OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 8 of 8

Thread: Aircon switch removal in a 2005 GU Patrol

  1. #1
    Beginner
    Join Date
    Jun 2020
    Location
    The Gap, Brisbane
    Posts
    6
    Thanks
    3
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Aircon switch removal in a 2005 GU Patrol

    My first post, so . . . be polite.,

    The A/C does not work. Fuse is fine. I want to check the button switch on the A/C control panel. There is power to the switch (though light doesn't work) when engine is running and fan are on. I can't work out how to get the switch itself out of the panel in which it's fixed. Button is off and connector too, but I'm stuck with the switch body.
    Who's done this and knows please?

    Thanks folks.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  3. #2
    Beginner
    Join Date
    Oct 2019
    Posts
    10
    Thanks
    1
    Thanked 2 Times in 2 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Needs to be pushed from the back forwards. Don’t do what I did (the reverse!).

  4. The Following User Says Thank You to Shephead For This Useful Post:

    vwq47 (22nd July 2020)

  5. #3
    Beginner
    Join Date
    Jun 2020
    Location
    The Gap, Brisbane
    Posts
    6
    Thanks
    3
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    G'day Shephead,
    Thanks for that - most useful. I'm used to VWs but my son bought a Patrol recently and so I've been spending a lot of time learning to manipulate my fingers in a Japanese rather than a German way. I appreciate the reply.

  6. #4
    The master farter
    mudski's Avatar
    Join Date
    Apr 2012
    Location
    Eltham North
    Posts
    15,612
    Thanks
    8,673
    Thanked 11,285 Times in 6,437 Posts
    Mentioned
    460 Post(s)
    Tagged
    1 Thread(s)
    Check the relay in the relay box. if theres no click from that the relay could be buggered. Swap it out for another relay of the same type in the vehicle. Which there should be.

  7. The Following User Says Thank You to mudski For This Useful Post:

    vwq47 (22nd July 2020)

  8. #5
    Beginner
    Join Date
    Jun 2020
    Location
    The Gap, Brisbane
    Posts
    6
    Thanks
    3
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks Mudski.
    I was getting to the relay but thought I
    'd short out the pressure switch in the drier. BINGO, there's the problem. The system worked - though no cold air. Suggested to me that the thing needs a gas recharge (at least) though I had checked there is good pressure (or so it appeared to a novice) in the system.
    Plugged the connector back into the drier connection and Hey Presto, the system behaves the way it should when A/C is turned on - though without cold air. This puts this particular issue out of my league and a visit to someone to look at the need for a recharge is in order.
    The "socket" in the drier faces upwards and was dirty inside from water having found its way in. I cleaned contacts as best I could and now it's someone else's job.
    Back to reassembling some of the sub-atomic particles I have released from the dash.

    Thanks again. (from Brisbane)
    I hope Eltham is OK Covid-19-wise? (Used to ride my pushbike out there when it was "the bush". My brother is in Doreen.

  9. #6
    The master farter
    mudski's Avatar
    Join Date
    Apr 2012
    Location
    Eltham North
    Posts
    15,612
    Thanks
    8,673
    Thanked 11,285 Times in 6,437 Posts
    Mentioned
    460 Post(s)
    Tagged
    1 Thread(s)
    I think I do remember an a/c chap saying if the gas is low the a/c won't turn on. Eltham is good. Still bushy, lots of tree huggers and way to many push bike riders. Lol.

  10. #7
    Moderator MudRunnerTD's Avatar
    Join Date
    Jun 2010
    Location
    Geelong
    Posts
    15,389
    Thanks
    12,176
    Thanked 13,491 Times in 6,596 Posts
    Mentioned
    330 Post(s)
    Tagged
    1 Thread(s)
    Yeah the pressure switch on the Dryer will not let the system function if there is no gas pressure. If you hot wired that pressure switch and the sytem works then you are out of gas. Take it in to have pressure checked and leak checked. Might need to run a die through the system to find the leak.
    Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!! ....... I'm a lucky bugger! I've got 2 of em!
    Check out my Toy --> MudRunnerTD's GQ From the Ground Up

    Quote Originally Posted by Rogue Dung Beetle View Post
    Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
    The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
    WARNING: Towballs used for recoveries can, and do kill people and damage property.

  11. #8
    Beginner
    Join Date
    Jun 2020
    Location
    The Gap, Brisbane
    Posts
    6
    Thanks
    3
    Thanked 1 Time in 1 Post
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    THanks MudRunner . . . That's the conclusion I have come to but it's not up to me to go to the A/C folk. There SOME pressure in the system though I have no suitable instrument to check it.
    Thanks again - and to each respondent.

  12. The Following User Says Thank You to vwq47 For This Useful Post:

    Travel (4th August 2020)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •