-
16th June 2020, 08:42 PM
#11
Patrol Guru
Mine is about where you’re is @First Pooy & I’ve never had a drama with mine mate
-
-
16th June 2020 08:42 PM
# ADS
Circuit advertisement
-
16th June 2020, 09:20 PM
#12
Expert
Thanks for the feed back Sprock it is good to hear from someone who has ready mounted it in a similar position and it works fine.
-
-
17th June 2020, 08:28 AM
#13
Found these pics of when I installed mine. Been there for 3 or so years without a hitch. I have the earth of the pump connected to the oil pressure switch so the pump will only turn on when theres oil pressure.
20151120_110125 (Small).jpgFL7CSn.jpg9rngoz.jpg
Now sitting behind this sheet of rubber.
IMG_2146.jpg
-
The Following User Says Thank You to mudski For This Useful Post:
First Pooy (18th June 2020)
-
18th June 2020, 03:47 PM
#14
Expert
Are you referring to a safety cut off switch to turn the pump off when there is no oil pressure, I brought a separate one then the standard oil pressure switch which is useless they turn on when the damage is already done.
-
The Following User Says Thank You to First Pooy For This Useful Post:
-
18th June 2020, 10:35 PM
#15
Originally Posted by
First Pooy
Are you referring to a safety cut off switch to turn the pump off when there is no oil pressure, I brought a separate one then the standard oil pressure switch which is useless they turn on when the damage is already done.
No. Just wired the earth of the pump to the factory oil Pressure switch itself. As that’s only an earth wire going to the switch. Works perfectly for me.
Sent from my iPhone using Tapatalk
-