-
24th May 2020, 11:39 PM
#1
New Member Introduction and Big Power TD Build
Hey guys,
Just thought i'd introduce myself. I am Josh, owner of a 99 dx gu td42 patrol, currently off the road getting prepped for a UFI billet crank in the old kettle. I am here to sus out your big power td builds for some advice and tips as this is my first attempt at building a motor from the ground up. Motor is a factory turbo blacktop that was running a P4x4 18g turbo, DPC 12mm pump, Bear Lee Alloy Flywheel, UFI Clutch and pushing out 240hp and 750nm on 30psi.
Throw up some tips and advice below for a decent power build, I have Spool forged rods, ARP studs sitting here ready to go.
Chhers Legends!
-
-
24th May 2020 11:39 PM
# ADS
Circuit advertisement
-
25th May 2020, 05:41 AM
#2
Legendary
Hey mate welcome. Sounds like a cool biuld, good luck looking forward to seeing how it goes. . .
Sent from my SM-G930F using Tapatalk
-
-
25th May 2020, 06:51 AM
#3
Patrol God
Welcome to the forum mate.
In the words of a Dhuck "QUACK".
-
-
25th May 2020, 11:45 AM
#4
Administrator
Welcome to the forum mate!
-
-
26th May 2020, 03:29 PM
#5
Patrol God
-