hey guys
A wont idel
it starts up but revs up and down and sometimes stalls in my experience thats something electrical i got a new MAF for it to run fine for 30 sec and then die. I sore a video where if you pull the plug on a maf and it stalls that means your maf is working fine witch it dose on the old one.
B headlights
i switch them on i get low beam on the drivers only and high beam on the passenger side only that and the above problem would lead me to believe some one has played with the wiring
C clutch
the clutch works good for the first 10 of driving affter that to get it to move you need to push it flat to the floor nether master or slave cylider are leeking
D brakes
I at 100/90 ks they dont seam to do much but at 50/60 the are some what effective when i pump the brake when its off it goes hard and i cant see any leeks
E whistling sound
i think there is some sort of leek for a vac line