-
22nd April 2020, 10:29 PM
#1
GQ Patrol - No Keys
Hi Team,
I just purchased a "Project" 97 Patrol RX Turbo Diesel..its in need of a fair bit of work. I had it transported to my garage , the previous owners have lost keys...so the first job is...either change ignition barrel/key or is it possible to get key cut to suit ?...cheers in advance for any info.
-
-
22nd April 2020 10:29 PM
# ADS
Circuit advertisement
-
23rd April 2020, 09:48 AM
#2
Expert
either way the barrel has to come off, so find a cheap second one or take barrel to key cut place to get a replacement key for that barrel and hope they don't change the key format /foot print, that way you can you it for other doors on the patrol
97 GU Ti 4.5 on lpg , uhf icom Pro400, Garmin GPS Maps, HD-Lukas Dash Cam with gps tracking. Snorkel , I-Max 12000lb Winch , Twin rear light bracket on wheel carrier for light & uhf antenna,Draws unit, Electric Cargo barrier, HID headlights kit, LED Light Bar, 2 inch lift with HD King springs and Monroe Gas Magnum TDT 4WD Shock Absorbers, BS Dueler 697 Lt 285/75R-16 .
-
The Following User Says Thank You to altech For This Useful Post:
Kiwi1968 (28th April 2020)
-
23rd April 2020, 02:51 PM
#3
most qualified locksmith can make a key to fit the ignition unless its too worn. If it was one key to suit all locks then it will still fit all locks.
Pete
-
-
23rd April 2020, 02:52 PM
#4
most qualified locksmiths can make a key to fit the ignition unless its too worn. If it was one key to suit all locks then it will still fit all locks.
Pete
-
-
23rd April 2020, 03:05 PM
#5
Patrol God
Get locksmith to re-key the locks so the old "Lost" keys can't be used.
-
-
23rd April 2020, 04:17 PM
#6
Ask Nissan for the lock codes then go to a real locksmith, not a Mr.Minute, and they can cut new keys by the code. I did this with my own Patrol.
-
The Following User Says Thank You to mudski For This Useful Post:
Yeti's Beast (23rd April 2020)
-
28th April 2020, 02:47 PM
#7
-