OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Old patrol roof rust repairs

  1. #21
    Beginner
    Join Date
    Sep 2019
    Location
    New Zealand
    Posts
    13
    Thanks
    0
    Thanked 53 Times in 12 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by PureCaboose View Post
    It's amazing how much time we don't have when in quarantine (not that it changed anything for us, if anything we go out more. sigh)
    Yup... I work in IT so I am able to work from home pretty easily. Combine that with a senior management team that are bored senseless as a result of the lockdown, and it's very easy to get buried in more work than you would have otherwise.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  3. #22
    Beginner
    Join Date
    Sep 2019
    Location
    New Zealand
    Posts
    13
    Thanks
    0
    Thanked 53 Times in 12 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Some more progress...

    Finished welding in and grinding back a patch:
    groundback.jpg

    Complete with some primer:
    patchpainte.jpg

    Marked out some steel:
    markup.jpg

    Then chopped it up:
    chopped.jpg

    I did three of these in total, then ran them through the bender and welded them end to end.
    The end result is too long to easily take a photo of, but it should be welded to the side of the frame rail in due course.

    Cleaned up the rear of the thing - removed what remained of the rear gutter and marked out the bit I need to cut out and patch:
    rrrust.jpg

    I ground off the rust in the good areas and gave them a shot of primer, but it was too dark to get a good photo.

    The next task is the back corner. A bit rusty...
    rrcorner.jpg

    I'll have to fabricate and weld in a temporary support for the roof frame before I chop that lot out.
    Attached Images Attached Images

  4. The Following 2 Users Say Thank You to Nhoward For This Useful Post:

    0-TJ-0 (18th May 2020), Sherro (16th May 2020)

  5. #23
    Legendary
    PeeBee's Avatar
    Join Date
    Sep 2016
    Location
    Melbourne South east
    Posts
    3,186
    Thanks
    2,789
    Thanked 2,763 Times in 1,679 Posts
    Mentioned
    136 Post(s)
    Tagged
    0 Thread(s)
    You are amazing, brilliant work, top stuff
    Manufacturer of the Complete Camp Oven System

    Website:http://davesstuff.net/

    Vendor Page: http://www.nissanpatrol.com.au/forum...ar-That-Works/

    Tuturial Video's: http://www.nissanpatrol.com.au/forum...ted-on-Youtube

  6. #24
    Beginner
    Join Date
    Sep 2019
    Location
    New Zealand
    Posts
    13
    Thanks
    0
    Thanked 53 Times in 12 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Time to do something about the rear right corner of this thing...

    Welded in some temporary support struts:
    temporarysupports.jpg

    Removed the rusted bit of the existing support, removed the remains of the gutter and marked out the intended path of the body saw:
    gutterectomy.jpg

    Marked out the cut on the rear:
    problem-circled.jpg

    A few moments with the body saw... no more rust, but some big holes to patch:
    rear-rustectomy.jpg
    side-rustectomy.jpg

    Test fitted the gutter I fabricated earlier:
    gutter-testfit.jpg

    Needs to be another 250mm longer, but looks like it'll work.

  7. The Following 3 Users Say Thank You to Nhoward For This Useful Post:

    0-TJ-0 (18th May 2020), mudnut (18th May 2020), Rossco (17th May 2020)

Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •