-
29th December 2019, 01:06 PM
#31
All done from that end.
RHS is nearly done and then bleed the brakes before it’s finally on the ground.
Sent from my iPhone using Tapatalk
-
-
29th December 2019 01:06 PM
# ADS
Circuit advertisement
-
29th December 2019, 03:03 PM
#32
Finally on terrafirma
Sent from my iPhone using Tapatalk
-
The Following 3 Users Say Thank You to Count Grantleyish For This Useful Post:
Cremulator (30th December 2019), MB TD42 (15th January 2020), PeeBee (29th December 2019)
-
29th December 2019, 04:14 PM
#33
Grill is in. Still to tidy up the wiring for RHS indicator before it’s fixed and bull bar being plonked on.
Sent from my iPhone using Tapatalk
-
-
29th December 2019, 04:50 PM
#34
It’s starting to look like a car now.
Sent from my iPhone using Tapatalk
-
The Following 3 Users Say Thank You to Count Grantleyish For This Useful Post:
Cremulator (30th December 2019), MB (30th December 2019), MB TD42 (15th January 2020)
-
4th January 2020, 02:52 PM
#35
Got to work on the Mav today, finally sourced non twisty steering wheel and took it out and then put the non twisty wheel in, replaced the negative earth cable, now working on RHS rear door as it’s playing up.
Now to do flares, windscreen and wipers.
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to Count Grantleyish For This Useful Post:
-
4th January 2020, 03:47 PM
#36
The door is fixed! As it turns out the plastic bit where handle goes in the lock mechanism were loose and mate has fixed it.
While measuring for flares and I’d discovered that LHS sticks out more than RHS meaning it has lift of some sort.
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to Count Grantleyish For This Useful Post:
-
4th January 2020, 06:41 PM
#37
Originally Posted by
Count Grantleyish
The door is fixed! As it turns out the plastic bit where handle goes in the lock mechanism were loose and mate has fixed it.
While measuring for flares and I’d discovered that LHS sticks out more than RHS meaning it has lift of some sort.
Sent from my iPhone using Tapatalk
After some googling, it may not be the case, either way I need to sort it out because 20/25mm variation from LHS to RHS.
-
The Following User Says Thank You to Count Grantleyish For This Useful Post:
-
15th January 2020, 04:46 PM
#38
No updates apart from bought a set of GU4 springs for $10 and see if axles are in-line with the chassis.
Don’t think I’ll get to spanner for a while, my back is now playing up and I’m at doctors office as I write this - fun times ahead!
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to Count Grantleyish For This Useful Post:
-
15th January 2020, 05:00 PM
#39
Patrol Guru
Argh, good luck. Back pain is never fun when you can't stand up straight.
While you're at the doctor's, get them to check if you have a 20/25mm variation from LHS to RHS.
-
The Following 2 Users Say Thank You to Cremulator For This Useful Post:
Count Grantleyish (15th January 2020), MB (26th January 2020)
-
15th January 2020, 05:01 PM
#40
Originally Posted by
Cremulator
Argh, good luck. Back pain is never fun when you can't stand up straight.
While you're at the doctor's, get them to check if you have a 20/25mm variation from LHS to RHS.
Yep, not so nice... and maybe I should!
Sent from my iPhone using Tapatalk
-
The Following 2 Users Say Thank You to Count Grantleyish For This Useful Post:
Cremulator (15th January 2020), MB (26th January 2020)
Posting Permissions
Reply With Quote