-
14th November 2019, 01:48 PM
#31
Legendary
Still at the shop ,went ok for 20 Kay's then stalled again it's sucking air at the filter housing so replaced filter housing primer with a new one and now the GU has cracked the shits big time .
Seems to be sucking the fuel out of the filter leaving it dry ( empty) so bit of a mystery unless there's problems now (still) further back in the tank maybe .
Mechanic is going to leave it for a few hours restart it and try cracking the injector lines to get whatever air is in it out and go from there .
Just to add insult to injury Bursons who sent the filter housing and pump down from Sydney it went missing from Monday to yesterday grrrrrrr.
-
-
14th November 2019 01:48 PM
# ADS
Circuit advertisement
-
14th November 2019, 02:24 PM
#32
Legendary
Originally Posted by
Cuppa
Try one of these in addition to a new filter top one. Makes priming so much easier. Not all are diesel compatible. This one is cheap too. Mine, (not this specific one) has been on several years now, but if it ever fails it's easy to take out of the line & rejoin.
https://www.ebay.com.au/itm/Hand-Pri...-/162709827636
Are thinking of an electronic pump thanks though .
-