-
8th October 2019, 11:15 PM
#1
ZD30 DDTi bubbles in header tank
Hello all,
I have been following this forum with interest for several years now and have been a recreational bush driver for most of my life in Nth Qld and NT and lately in NSW.
I had a G60 SWB wagon and caravan in the late 80's until it became impractical with a growing family. After a few 2wd towing vehicles I now have a 2003 GU111 Wagon with the ZD30DDTi engine which I found to be a great, economical, comfortable vehicle until the last trip away with the van when it suddenly overheated and started blowing bubbles in the header tank. I bought the car 5 years ago and have fitted several mods that I found in the advice posts on forums - temp and boost gauges, exhaust recirculation blank, Dawes valve boost control, breather vapour separator, oversize intercooler, and thought that I had bulletproofed it as much as possible. A local mechanic told me that I have done well to get 370+k from the engine so I am looking for options to get it back on the road - I am now retired and do not have an unlimited budget!
Has anyone in a similar situation had experience with repairers on the NSW Central Coast that they would recommend and which options they chose to go with?
Thanks for advice
Cheers
-
The Following User Says Thank You to RJames For This Useful Post:
-
8th October 2019 11:15 PM
# ADS
Circuit advertisement
-
9th October 2019, 12:25 AM
#2
.........
Does sound very unfortunate sorry to hear James mate!
I believe maybe you’re asking whether or not to fix the 3.0L head/gasket/block and or change motors expensively too?
Sent from my iPhone using Tapatalk
-
-
9th October 2019, 07:56 AM
#3
Patrol God
Welcome to the forum mate
In the words of a Dhuck "QUACK".
-
-
9th October 2019, 10:34 PM
#4
Patrol Freak
You have either done a head gasket or you have a cracked head. Not good or cheap news.
-