Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Hello guys I am new member I am helping my grandpa to get the car back in shape we own our 1998 nissan patrol TB45E 4SP AT since 1998 I replaced a faulty tps but it has wire problem I depinned 3 wires and connect only 2 exept middle without wire on the middle pin tps reads as it should when adjusting it can go 0.10v-0.85 and if set to 0.50v closed thottle it will go to 4.25v WOT but here is the problem when I connect the middle white wire and read from it connected voltage reads go off down to 0.05-0.17v so its aparent that the problem is in that wire if anybody can post tb45e tps wiring to help I've been searching it for a week now and finding tb45e wiring is next to impossible as its a rare engine
car wont rev more than 3000rpm in D in 2 and 1 it will rev to max but not in D and if you are cruising 100kmh and push pedal 100% it wont kick down