-
3rd July 2019, 10:00 PM
#1
Hi all, new member from Adelaide
Hi guys, having a lot of trouble removing the bolt which holds on the inlet into the slave cylinder. The slave cylinder is the original from my 1988 N/A td42 Gq and I just can’t get it to budge. A point in the right direction or any tips would be greatly appreciated cheers. ✌🏻
-
-
3rd July 2019 10:00 PM
# ADS
Circuit advertisement
-
3rd July 2019, 10:24 PM
#2
Patrol Guru
Welcome mate. Folks here are nice and usually happy to help but they ask for a simple introduction.. THEN you can move on and start asking questions in the appropriate area.
-
-
3rd July 2019, 10:47 PM
#3
Patrol God
Welcome to the forum mate.
In the words of a Dhuck "QUACK".
-
-
4th July 2019, 06:54 AM
#4
Administrator
Welcome to the forum mate, you might get a better response by asking questions in a different section as a lot of folk don't read the intros.
-
-
4th July 2019, 08:21 PM
#5
Sorry for that guys, rookie on this sort of stuff and will do cheers
-
-
4th July 2019, 08:31 PM
#6
Patrol Freak
Hi and welcome to the forum.
As I lay there looking up, taking in the spectacular view that was the night sky and the multitude of stars I asked myself, where did my tent go?
-
-
11th July 2019, 01:20 AM
#7
Welcome, your in the right place to get the help you need
-