Quote Originally Posted by sn5013 View Post
the actuator is something i havnt played with as yet but wouldnt mind doing.

Bare in mind mine is auto, but if i put my foot down and it drops a gear, rpms rise obviously
and she spools up quick
, i wouldn't say its laggy at all and it responds well but if i keep the throttle down for say 5-10 seconds it will then hit limp mode.

if i take of from the lights with 30% throttle she picks up pretty good but at around 45km it hits limp mode then does it again at around 65km but from there upwards limp mode doesnt come back on.
U say
she spools up quick
, does it feel like a gradual increase of spooling up (linear) or does it surge a bit (like starts off gaining at a steady rate and then increases rapidly with a surge)?

When you:
take of from the lights with 30% throttle she picks up pretty good but at around 45km it hits limp mode then does it again at around 65km but from there upwards limp mode doesnt come back on.
What is the max boost reading at these points?

Have U tried reducing your spool rate, unwinding the needle valve?
Have U tried reducing max boost by unwinding the Tillix?