Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Made a mod to my spring and ball boost controller that may be usefull to those with spring / ball jamming or sticking issues.
I removed the ball altogether and replaced it with a counter sunk screw that is only slightly smaller than the I.D. on the controller but larger than the spring diameter.
Have attached a pic to make my ramblings easier to understand.
max boost is now on 18psi with needle valve open 1/4 turn for about 10psi at 100km.
There is no boost spike or jumpy needle as before which I suspect was from the ball / spring.
Having the screw shank go down the barb keeps everything inline and moving freely.