Hose not connected on GU III TD42Ti

[0-TJ-0]

Too much effort here gents.
Just rip the whole idle up assembly off you don't need it. TD42 has enough idling grunt for AC compressor to be spun.
I ripped my entire system out. Less hoses and wires, etc...

I was told exactly that same thing when I fitted the 12mm pump but I find it struggles a bit now sitting at lights and what not on these hot summer days. So much so I'm going to the extra effort to refit the bits I took off. Each to their own

Glad you got it sorted mate.

[Hodge]

I was told exactly that same thing when I fitted the 12mm pump but I find it struggles a bit now sitting at lights and what not on these hot summer days. So much so I'm going to the extra effort to refit the bits I took off. Each to their own

Glad you got it sorted mate.

Glad you sorted yours out too mate. That's what this forum is about !!

For what it's worth. My AC is same regardless of rpm and ambient temps.
If yours struggles a tad without higher revs it may need other attention, possibly regas ?


Sent from my SM-N920I using Tapatalk

[0-TJ-0]

It may need a re-gas. But it was fine before I tore all the aircon bits off and it's fine as soon as we're moving and there's a few extra rev's and air flow.

So I'll put the bits back on and save the re-gas for another couple of years haha.