OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: What's the noise?

  1. #11
    Patrol Freak Bidja's Avatar
    Join Date
    Jul 2017
    Location
    Southern Table Lands, NSW
    Posts
    1,089
    Thanks
    1,183
    Thanked 1,006 Times in 565 Posts
    Mentioned
    37 Post(s)
    Tagged
    1 Thread(s)
    As per edit note

    For the noise, when it is happening at idle, open the needle valve gradually and does it stop?
    Last edited by Bidja; 15th February 2019 at 07:58 PM. Reason: Deleted first para referred to your boost thread so put it there
    2008 GU WAG ST Manual CRD - To do the job

  2. The Following User Says Thank You to Bidja For This Useful Post:

    10G (15th February 2019)

  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  4. #12
    Patrol Freak
    Join Date
    May 2016
    Location
    lower west victoria
    Posts
    1,456
    Thanks
    976
    Thanked 1,320 Times in 754 Posts
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Bidja View Post
    If CRD check that the VNT solenoid is still plugged in. CRD require it to be plugged in when Dawes/needle installed even though VNT solenoid is bypassed(vac).
    Also check vac lines as you said and at idle have a look and see if the actuator rod is in the up most position (lever hitting stop). Check to see if the actuator rod lock nut has not come loose an allowed the actuator rod length to increase. If too long eng will become very laggy and exhaust will get more of a throaty sound and higher EGTs. The witness line up marks on the the adjuster thumb wheel to actuator rod will indicate any movement. Best leave it alone if looks like it has not moved.

    For the noise, when it is happening at idle, open the needle valve gradually and does it stop?
    Thanks Bidja, I'll check all that out over the weekend. Much appreciated.
    ..

  5. The Following User Says Thank You to 10G For This Useful Post:

    Bidja (15th February 2019)

  6. #13
    Expert
    Join Date
    Jan 2018
    Posts
    291
    Thanks
    69
    Thanked 73 Times in 57 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Is it manual? If its manual then thats the standard gearbox chatter. Sounds like rattle or pinging .

  7. #14
    Beginner
    Join Date
    Mar 2019
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Got the solution for the noise.

  8. #15
    Patrol Freak
    Join Date
    May 2016
    Location
    lower west victoria
    Posts
    1,456
    Thanks
    976
    Thanked 1,320 Times in 754 Posts
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    Seems this is normal. It was enhanced by the vacuum leak that I had. Once I fixed the leak, the rattle almost went away.
    ..

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •