-
8th February 2019, 01:04 PM
#1
Hi all
Hello all, I've owned my '08 CRD for around 5 years now. It's been a good old bus but its starting to have a few little issues now. Just getting to that age I suppose. Just recently did the exhaust manifold gasket. Broken studs are so fun. At the time I saw a very slight leak at the timing cover, but didn't want to go that far at the time. So now the time has come. Leaving puddles on the ground now . At this stage I'm thinking motor out and give it a good going over. Is there anywhere to get the CRD work shop manual. I have the downloaded a few but now seem to cover the CRD very well. Any help with the manual or tips for doing the job would be much appreciated
-
-
8th February 2019 01:04 PM
# ADS
Circuit advertisement
-
8th February 2019, 03:04 PM
#2
Legendary
G'day mate and welcome to the forum.
2005 GU IV ST 3.0. Snorkel. Roof rack. Awning. Spots. Welded I/C. Dual batteries & VSR. UHF. Barn door hinge extension. Roof top spot lights. Rear drawers. 2" lift. NADS. EGT and boost gauges. Trans temp and water temp gauges. Provent 200 catch can. Rear ladder
And crawling on the planet's face, some insects called the human race. Lost in time. And lost in space... and meaning.
-
-
8th February 2019, 03:34 PM
#3
Patrol God
Welcome to the forum mate
In the words of a Dhuck "QUACK".
-
-
8th February 2019, 06:42 PM
#4
Administrator
Welcome to the forum mate and feel free to ask any questions.
-
-
8th February 2019, 06:59 PM
#5
Patrol Freak
Hello and welcome to the forum.
As I lay there looking up, taking in the spectacular view that was the night sky and the multitude of stars I asked myself, where did my tent go?
-