What are good brand air intakes ?

[First Pooy]

Is this what I would need ? It says 4 inch on it so I would need to use a reducerScreenshot_20181127-215528_Samsung Internet.jpg

[First Pooy]

How the hell am I suppose to fit anything there let alone 9 inches20181128_173726.jpg20181128_173643.jpg20181128_173634.jpg20181128_173648.jpg

[First Pooy]

And another 20181128_173705.jpg

[Bidja]

Yeah, air box manufactures that I have come across are Fatz Fabrication, Radius Fabrication (Both do GU, not sure about GQ)_U will have to ask them.

Millweld do a GQ airbox
https://www.millweld.com/a/Airboxes
Check them out.

The bloke that made mine, makes for GU TD42T and ZDs. Maybe he can help out.


Some of your pics are 1Meg+ could resize down to under 200KB

[Bidja]

By the way did not say U needed a 9" pod. Just pointed out which one I procured, it showed how the base of the pod was blanked off and suggested that U need the pod filter with the small end dia to be facing the inlet port of air box.

Hope it helps out mate.

[First Pooy]

Thanks for the help it is going to be a bitch fight and I didn't want to do this until later but my intercooler piping is causing me trouble to get past the original ducting,it looks like I need to make up a smaller battery holder and muck around with a few other things as well