-
23rd October 2018, 10:44 AM
#11
So can this be welded until I find a replacement?ED31FCD0-29F5-43C3-8D40-5D4A70C89790.jpeg
NED The Iron Outlaw, 2006 GU Manual ZD30Di.
-
-
23rd October 2018 10:44 AM
# ADS
Circuit advertisement
-
23rd October 2018, 02:44 PM
#12
Just block of both ends where they mount up and be done with it. If it were me, I would block both ends and bolt that broken pipe back up just incase mr plod pulls you up and notices its missing. Big fine.
-
-
23rd October 2018, 02:58 PM
#13
Will it effect the EGR sensor? Already blocked the one that goes to the manifold.
NED The Iron Outlaw, 2006 GU Manual ZD30Di.
-
-
23rd October 2018, 03:04 PM
#14
Originally Posted by
Pj-14
Will it effect the EGR sensor? Already blocked the one that goes to the manifold.
No. So just get a plate for the other end, they are shaped differently, then put it all back together.
-
-
23rd October 2018, 04:38 PM
#15
NED The Iron Outlaw, 2006 GU Manual ZD30Di.
-
-
23rd October 2018, 05:05 PM
#16
Thats the one that broken correct? If so block it off at the top, which you already have, and also block it at the bottom, and put the pipe back on as normal and ignore the fact that its broken. It will just be there for looks now.
Last edited by mudski; 23rd October 2018 at 05:08 PM.
-
-
24th October 2018, 05:19 PM
#17
Yes top (arrow)pipe is the broken one, so just block those ends and alll will be good?
NED The Iron Outlaw, 2006 GU Manual ZD30Di.
-