-
3rd October 2018, 09:57 PM
#1
Side body door molding for 2003 GU Patrol
Removed the side body moldings as they were cracked and starting to come off. Anyway they wont be going back on as they have had it so Ive been looking around for something to replace them with. As I now have holes in my doors from the clips that helped keep these moldings in place I need a molding that is a minimum of 2" to cover these holes. Ive looked far and wide and cant find anything in OZ that would be suitable, anyone got any suggestions on replacement side body molding for a GU Patrol?
Had a 1999 GU ST Patrol 4.5L Auto on Dual Fuel ...now have a 2003 GU ST ZD30TD Auto.
-
-
3rd October 2018 09:57 PM
# ADS
Circuit advertisement
-
4th October 2018, 08:06 AM
#2
Get some from a wrecker. There'd be heaps around. Or, you local shopping car park
-
-
4th October 2018, 06:52 PM
#3
I would imagine that it would be hard to get these body molding off in one piece to be used over again. I snapped a rear one getting them off and any heat and they warp to buggery hence why I am looking for an alternative solution.
Had a 1999 GU ST Patrol 4.5L Auto on Dual Fuel ...now have a 2003 GU ST ZD30TD Auto.
-
-
4th October 2018, 09:17 PM
#4
Originally Posted by
tallman
I would imagine that it would be hard to get these body molding off in one piece to be used over again. I snapped a rear one getting them off and any heat and they warp to buggery hence why I am looking for an alternative solution.
Depends on how you get them off I suppose...
-