Hi all,

I just did a swivel hub rebuild and replaced my front rotors and pads while I was at it. The new bendex pads I put in were marked l/h and r/h (two of each in the pack).

What does this mean? The two left hand go in the left wheel. Or the left hand goes on the left each caliber. The only difference I could notice was that of the two marked the same, each had the locating clip/spring on the opposite end.

I put the two left on the left and the two right in the right.

All seems to be working ok so I hope I have done it right?

Thanks in advance

Joe


Sent from my iPhone using Tapatalk