-
31st August 2018, 01:15 PM
#1
91 Ford Maverick factory spot light wiring?
Hey guys I'm planning on putting floodlights on my patrol soon. Theres existing wiring at the front grill with proper water proof plugs on both sides of the car. The owner before me had some ARB spotties on the front but took them off when he sold it to me. The wiring looks stock as it goes into the main wiring harness from what I can see but for the life of me I cannot figure out how to switch on the plugs. I've tried all combinations that I can think of but I just cant get em to come on. Any ideas?
Heres pics of the plugs.
2.JPG
Capture.JPG
-
-
31st August 2018 01:15 PM
# ADS
Circuit advertisement
-
31st August 2018, 01:50 PM
#2
Legendary
I dont know that particular model, but have you checked your fuse blocks for a blown or removed fuse? Also lights will probably be switched via high beam.
2005 GU IV ST 3.0. Snorkel. Roof rack. Awning. Spots. Welded I/C. Dual batteries & VSR. UHF. Barn door hinge extension. Roof top spot lights. Rear drawers. 2" lift. NADS. EGT and boost gauges. Trans temp and water temp gauges. Provent 200 catch can. Rear ladder
And crawling on the planet's face, some insects called the human race. Lost in time. And lost in space... and meaning.
-
-
31st August 2018, 02:49 PM
#3
Originally Posted by
4bye4
I dont know that particular model, but have you checked your fuse blocks for a blown or removed fuse? Also lights will probably be switched via high beam.
Yeh fuses are all good. The car also has about 5 aux switches in the cabin. I've tried all of them in combination with the high/low beam switch too. Think I'm just gonna have to wire them up without using the stock wiring.
-