-
5th July 2018, 03:54 AM
#1
Inline injection pump td42
Hi guys I’m new here looking for a bit of advice,I’ve had a old td 42 engine out of a scrap car some 15 years now,rebuilt it had the inline injection pump rebuilt to,now I’m putting this in a 64 ford f100 & plumbing up the fuel system I’ve come to a stop looking at the top of the pump from the front of the engine you have fuel in ,then at the rear there’s 2 more pipped unions the rear one I think goes onto the throttle body I think,then there’s one next to the last one ,can anybody tell me where this should be connected to? Thanks
-
-
5th July 2018 03:54 AM
# ADS
Circuit advertisement
-
5th July 2018, 09:42 AM
#2
it might be the fuel return to the tank
-
The Following User Says Thank You to Tip12345 For This Useful Post:
-
5th July 2018, 09:52 AM
#3
Legendary
Did the td42 ever have an inline pump, thought it was just the rotary just out of interest sake. . .
Sent from my SM-G930F using Tapatalk
-
-
5th July 2018, 05:10 PM
#4
Originally Posted by
Rossco
Did the td42 ever have an inline pump, thought it was just the rotary just out of interest sake. . .
Sent from my SM-G930F using Tapatalk
I think some of the early TD42 Nissan buses and light trucks had inline pumps. Around early to mid 80's.
-
The Following User Says Thank You to mudski For This Useful Post:
-
5th July 2018, 11:41 PM
#5
Yes its a early nissan patrol pump,the first td42 s had these pumps on before they went rotary,dont think a fuel return,no sure if its some sort of breather,hoping someone out there in oz will have this pump on theres & be able tell me
-
-
6th July 2018, 07:55 AM
#6
Having searched the net ,I think it’s a breather & goes into the standard air filter
-
-
23rd July 2018, 03:20 PM
#7
The front connection is the fuel inlet, the rear connection is the vacuum governor connection and goes to the throttle butterfly.
-
The Following User Says Thank You to Portdyno For This Useful Post:
MudRunnerTD (23rd July 2018)