-
25th June 2018, 10:19 PM
#21
.........
Bugger the stickers sorry gents :-)
Very thankful we are to knowledgeable blokes mentioned above for suggesting extras like GigglePin Brake Shafts.
Again, we are asking an originally designed 8,000lb only winch to achieve 3.0T++ lugging/hill holding/breathtaking:-)
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to MB For This Useful Post:
-
25th June 2018 10:19 PM
# ADS
Circuit advertisement
-
25th June 2018, 10:27 PM
#22
Whats a Gigglepin brake shaft? Is it a necessity?
-
The Following User Says Thank You to mudski For This Useful Post:
-
25th June 2018, 10:38 PM
#23
The 747
Originally Posted by
mudski
Whats a Gigglepin brake shaft? Is it a necessity?
It's a good upgrade but not necessary. Expensive.
Upgrading your Warn brakeshaft by drilling and tapping a thread into the end so you can bolt on a cap, rather than relying on the circlip is a smart move though and cheap.
Sent from my SM-G960F using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
-
25th June 2018, 10:40 PM
#24
.........
Not on a 2.0T Land Crab :-)
http://gigglepin4x4.net/ekmps/shops/...ting-guide.pdf
Sent from my iPhone using Tapatalk
-
-
25th June 2018, 10:56 PM
#25
Legendary
Yeah it's kinda how long is a piece of string in terms of what you can do to a mod a high mount. Depends on what and how much use it gets too I guess. I would get lower and brake service kits for now then motor and rope the other little things you can do are just hardware such as drain & fill plugs breathers etc. . . Also need Albright solenoid and switch for in cab. .
Sent from my SM-G930F using Tapatalk
-
The Following User Says Thank You to Rossco For This Useful Post:
-
25th June 2018, 11:09 PM
#26
.........
Totally agreed and....:-)
I probably haven’t explained experiences correctly as to their OEM capabilities. GQ’s (Y60 beasts) are light / GU’s (Y61’s tanks) are heavy!
Warn HM’s do absolutely need serious upgrading to be useful on a GU Mr Mudski Family Mate Y61 !!
Sent from my iPhone using Tapatalk
-
-
26th June 2018, 12:10 AM
#27
Moderator
Originally Posted by
mudski
Cant I just get the sticker kit in OZ? Or are they not available here?
No not that i am aware of. Warn In the USA will send you one for FREE.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
-
26th June 2018, 12:21 AM
#28
Moderator
Originally Posted by
mudski
Thought I might quickly get a few things off Amazon while before they close it off to us. I wasn't going to but, I am now. Lol. Without knowing what is needed, apart from the lower house service kit and the brake service kit. What else should be replaced regardless? I may not have time to strip it down fully by the weekend.
See this list
https://warn.com/truck/ReplacementPa...25/37492F3.pdf
buy this
https://www.amazon.com/Warn-Industri...ds=warn+needle
add to that tot he other 2 kits and thats about all you can get off amazon
Last edited by MudRunnerTD; 26th June 2018 at 12:29 AM.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
-
26th June 2018, 12:28 AM
#29
Moderator
Originally Posted by
MB
I have this upgrade is it is a Significant step up from the factory shaft. I really didnt get it until i fitted this and realised how bloody good it is! Impressive bit of kit. It is a lot more than just and End Cap.
Gigglepin Solenoid would be a No Brainer and if your happy to spend a bit of coin then this would make my list.
I assume your already accepting that you need a new motor and i would go with the Iskra as detailed above. This motor was not designed for Winching or vehicle applications and is an Industrial Motor. on this basis it has a different windings and brushes designed for constant load. The HP rating on them is also not based on the same scale as the Warn and Bow2 motors and they are highly regarded.
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to MudRunnerTD For This Useful Post:
-
26th June 2018, 12:43 AM
#30
.........
Tis about late night time you stepped in ‘Mentor’ mate :-) !
Now please do help better explain to the masses that Warn HM’s are useless on big trucks without big bucks ;-)
Sent from my iPhone using Tapatalk
-
The Following User Says Thank You to MB For This Useful Post:
MudRunnerTD (26th June 2018)