-
19th July 2018, 09:37 PM
#1
TD42 Thermostat housing bolt thread size?
I'm not sure of the pitch. It looks like 1.5 by eye.
I changed out the stat and the gasket was an aftermarket one and the holes in the gasket weren't exact apart and upon putting the bolts back in one went in on a slight angle. So now I have to find a tap and and run this down the thread to bring it back to life.
-
-
19th July 2018 09:37 PM
# ADS
Circuit advertisement
-
20th July 2018, 11:18 AM
#2
Patrol God
-
The Following User Says Thank You to nissannewby For This Useful Post:
-
20th July 2018, 12:30 PM
#3
Moderator
Or drill out and M10 Helicoil
Its a Nissan! =====> Its a Keeper!! ....... Got a TD42 in it BONUS!!
....... I'm a lucky bugger! I've got 2 of em!
Check out my Toy -->
MudRunnerTD's GQ From the Ground Up
Originally Posted by
Rogue Dung Beetle
Wish it was Nissan though, Toyotas just can't keep up with the Pootrol pace.
The only good thing about an 80 series is..... the front end?? Wrong!!, the Engine?? Wrong!! the Full Time 4WD system?? Wrong!! Its the NissanPatrol.com.au stubby holder fitted over the transfer lever.
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
-
20th July 2018, 12:59 PM
#4
Originally Posted by
MudRunnerTD
Or drill out and M10 Helicoil
I think I will get away with running a tap down it. It only grabbed and turned maybe 1 1/2 turns before I stopped.
-