-
20th September 2015, 07:32 PM
#1
Smart like tractor
Some td42 pics
Here is some pics of my fresh motor. It was supposed to go in this weekend but I have been working interstate and just got back. It's fully balaced, the rotating assembly is balanced to 0.01g and the pistons and rods etc are individually balanced to 0.0002g. It has ceramic coated genuine UD pistons and turbo oil pump.
FB_IMG_1442731160439.jpg
FB_IMG_1442731139423.jpg
Sticking with the garrett for now. I want to see what the engine mods can do for it.
FB_IMG_1442731145124.jpg
The flywheel has been lightened in an effort to move the deadly harmonics that contribute to crank failure out of the useable rev range.
FB_IMG_1442731155342.jpg
The exhaust manifold, turbine housing, v-band flange are ceramic coated. The manifold, turbine housing and wastegate port have been ported
FB_IMG_1442731186735.jpg
FB_IMG_1442731178719.jpg
The head has oversize valves with a 4 angle grind, ceramic coated pre combustion chambers inside and out, the face of the valves and combustion face is ceramic coated as well as the entire exhaust valve and exhaust runner and the intake runners have been cleaned up and polished
FB_IMG_1442731192290.jpg
FB_IMG_1442731173666.jpg
FB_IMG_1442731164846.jpg
Last edited by Ben-e-boy; 20th September 2015 at 07:55 PM.
96 GQ coil/Cab
08 G6eT
![](image.php?s=23b8b6226187b0f16ca4e3fb72f6e144&u=1281&type=sigpic&dateline=1483248064)
-
The Following 11 Users Say Thank You to Ben-e-boy For This Useful Post:
AB (20th September 2015), Bloodyaussie (20th September 2015), Cuppa (20th September 2015), GUtsy ute (4th October 2015), jack (21st September 2015), NissanGQ4.2 (20th September 2015), Onkey (5th October 2015), Punderhead (5th October 2015), Rossco (20th September 2015), Wine_maker (15th May 2018), Woof (20th September 2015)
-
20th September 2015 07:32 PM
# ADS
Circuit advertisement
-
20th September 2015, 07:37 PM
#2
Wow just a little bit of work into it Ben. Lol.
Im assuming your hunting for the magic 200plus figures?
-
-
20th September 2015, 07:41 PM
#3
Patrol God
Awesome!!!!
Cant wait to go for a spin in this thing.
-
-
20th September 2015, 08:03 PM
#4
Smart like tractor
![Quote](images/misc/quote_icon.png)
Originally Posted by
mudski
Wow just a little bit of work into it Ben. Lol.
Im assuming your hunting for the magic 200plus figures?
Dunno, the end power figure is going to determined by how much torque it produces, so it may very well stay at 180ish rwkw like is was before.
Once the clutch wears out and I get a fully hectic one. I will really screw some fat into it for a brag run
96 GQ coil/Cab
08 G6eT
![](image.php?s=23b8b6226187b0f16ca4e3fb72f6e144&u=1281&type=sigpic&dateline=1483248064)
-
The Following User Says Thank You to Ben-e-boy For This Useful Post:
mudski (20th September 2015)
-
20th September 2015, 08:04 PM
#5
Patrol Guru
well done mate. looking forward to seeing what you think of it.
-
-
20th September 2015, 08:10 PM
#6
Patrol Freak
John
2001 GUII TI 4500 - Now converted to TD42T auto with Nomad valve body
-
-
20th September 2015, 08:23 PM
#7
You live in the wrong state Benny
-
-
20th September 2015, 08:26 PM
#8
The 747
-
-
20th September 2015, 09:59 PM
#9
Smart like tractor
![Quote](images/misc/quote_icon.png)
Originally Posted by
Winnie
Can't wait to see this!!
Maybe next year, between the fire season and snow season
96 GQ coil/Cab
08 G6eT
![](image.php?s=23b8b6226187b0f16ca4e3fb72f6e144&u=1281&type=sigpic&dateline=1483248064)
-
The Following 4 Users Say Thank You to Ben-e-boy For This Useful Post:
AB (21st September 2015), Bloodyaussie (20th September 2015), Rossco (20th September 2015), Winnie (20th September 2015)
-
21st September 2015, 07:15 AM
#10
Administrator
Well done Benny, are you considering the Borg Warner now or stick with the garret?
Edit: Just read your post again...lol....no worries!
-